2.2. Water consumption industrially
In industry, water performs many functions. These range
from being used as a raw material in the beverage industry, to
cleaning in manufacturing facilities and cooling in power generation
stations. Typically, in a manufacturing facility, mains
water is taken in and although it is true that the supply cost is
low, the additional value-added costs involving labour, materials,
energy and equipment required for the operations such
as purification, chemical treatment and ultimate disposal, increase
the financial value of the water considerably.
In the commercial and retail sectors, the penalty for excessive
utilisation is of significance; however in the industrial
situation it is not as onerous as the relative cost of the
water compared to other utilities is low. Industrial facilities
purchase their raw water supply and also contribute towards
its treatment on discharge. However, due to the relatively
low cost, the impact on water conservation is very small.
Consequentially, water conservation investments provide a
relatively low payback, which leads to difficulty with their justification.
In certain industries, such as those in the food and
beverage sector, the investments are justified and there have
been considerable improvements made in many installations
by a combination of strategic investments along with focused
low-cost operational and maintenance improvements. However,
in other large industries the justification is solely based
on the commitment to improvement of the corporate and social
responsibility. The primary focus of any industry is on
its fundamental business and not on energy or water efficiency.
However these may be incorporated into its larger objectives
in order to achieve cost control and satisfy corporate
and social responsibilities. Undeniably several large corporations
successfully spearhead the debate relating to resource
efficiencies and actively promote discussion relating to the
changes required to facilitate the effective management of
water and energy.
In order to assist and encourage attention in these areas,
the requirement for a system of assigning real or added value
to water is required and has been identified (Walsh et al.,
2015)
2.2 . ปริมาณการใช้น้ำทางอุตสาหกรรมในอุตสาหกรรมน้ำแสดงฟังก์ชันหลายฟังก์ชัน เหล่านี้ช่วงจากการใช้เป็นวัตถุดิบในอุตสาหกรรมเครื่องดื่ม ,ทำความสะอาดเครื่องผลิตกระแสไฟฟ้าและทำความเย็นในสถานี โดยทั่วไปแล้ว ในโรงงานผลิตหลักถ่ายในน้ำและมันเป็นความจริงว่าต้นทุน จัดหาต่ำ เพิ่มค่าใช้จ่ายเพิ่มเติมที่เกี่ยวข้องกับแรงงาน วัสดุพลังงานและอุปกรณ์ที่จำเป็นสำหรับการดำเนินงานเช่นอย่างบริสุทธิ์ , การรักษาทางเคมีและสุดท้ายขายทิ้งเพิ่มด้านคุณค่าของน้ำมากขึ้นในภาคการค้าและค้าปลีก , โทษมากเกินไปการใช้เป็นสำคัญ อย่างไรก็ตามในอุตสาหกรรมสถานการณ์มันไม่ได้เป็นหนักเป็นค่าใช้จ่ายญาติของน้ำเมื่อเทียบกับสาธารณูปโภคอื่น ๆต่ำ เครื่องอุตสาหกรรมจัดซื้อจัดหาวัตถุดิบและยังสนับสนุนต่อการรักษาในการปล่อย อย่างไรก็ตาม เนื่องจากไปค่อนข้างค่าใช้จ่ายต่ำ , ผลกระทบต่อการอนุรักษ์น้ำมีขนาดเล็กมากconsequentially , การลงทุนในการอนุรักษ์น้ำให้การคืนทุนค่อนข้างต่ำ ซึ่งจะนำไปสู่ปัญหากับเหตุผลของพวกเขาในบางอุตสาหกรรม เช่นในอาหารหมวดเครื่องดื่ม การลงทุนมีความชอบธรรมและมีได้รับการปรับปรุงมากในการติดตั้งหลายโดยรวมของการลงทุนเชิงกลยุทธ์พร้อมกับโฟกัสการปรับปรุงการดำเนินงานและการบำรุงรักษาต่ำ . อย่างไรก็ตามในอุตสาหกรรมขนาดใหญ่อื่น ๆเหตุผล แต่เพียงผู้เดียวจากในความมุ่งมั่นในการพัฒนาองค์กรและสังคมความรับผิดชอบ เน้นหลักของอุตสาหกรรมใด ๆ คือธุรกิจพื้นฐานและพลังงานหรือประสิทธิภาพน้ำอย่างไรก็ตามเหล่านี้อาจรวมอยู่ในวัตถุประสงค์ของขนาดใหญ่เพื่อให้บรรลุการควบคุมต้นทุน และการตอบสนองของ บริษัทและความรับผิดชอบทางสังคม หลาย บริษัท ขนาดใหญ่อย่างปฏิเสธไม่ได้เป็นหัวหอกในการอภิปรายที่เกี่ยวข้องกับทรัพยากร เรียบร้อยแล้วประสิทธิภาพและการอภิปรายที่เกี่ยวข้องกับงานส่งเสริมการเปลี่ยนแปลงที่จำเป็นเพื่ออำนวยความสะดวกในการจัดการที่มีประสิทธิภาพของน้ำและพลังงานเพื่อช่วยเหลือและกระตุ้นความสนใจในพื้นที่เหล่านี้ความต้องการระบบของการเพิ่มมูลค่าที่แท้จริงหรือน้ำเป็นสิ่งจำเป็นและได้รับการระบุ ( วอลช์ et al . ,2015 )
การแปล กรุณารอสักครู่..
