1. Unpack your All-In-One.
2. Connect the power supply cord.
3. Make sure the power light is on.
4. Raise the paper support and extend the paper exit tray.
5. Lift the scanner unit.
6. Remove the sticker and tape from the print cartridge(s).
7. Insert the cartridge(s) and snap the lid(s) closed.
8. Close the scanner unit.
9. Load paper, and adjust the paper guide.
10. Make sure the computer is on.
11. Connect the USB cable.
12. Important! Click Cancel on all Add New Hardware screens.
13. Insert the CD.
14. Install the software.