Factors Affect Dye Hydrolysis
Liquor Ratio: Longer liquor ratio increases Hydrolysis and vice versa.
Salt Concentration: Higher Salt Concentration decreases Hydrolysis upto a limit and vice versa.
PH: Higher PH Increases Hydrolysis and vice versa.
Temperature: Higher Temperature increases Hydrolysis and vice versa.
Dye Reactivity: Increase both hydrolysis & fixation rate.
Dye Substantivity: More substantive dye cause more hydrolysis but if substantivity is reduced to bare minimum or removed altogether, the build-up problem arises during dyeing and color yield problem (dyeing) of the dye is reduced considerably.
Time: Higher Dyeing time increases Hydrolysis and vice versa.
Type & number of Reactive Group: VinylSulphone is more prone to hydrolysis than Triazinyl group.
Types of bridging group: The oxide (O-) and sulphide bridges are less stable in alkaline hydrolysis. But more stable bridges decreases reaction rate along with the hydrolysis.
Hydrolysis & no of Reactive groups in a Reactive Dye
Covalent bond formation and hydrolysis take place concurrently during the dyeing of cellulose with a reactive dye. Clearly if the dye has only on reactive group, hydrolyzed product can no longer take part in the dyeing. However if the dye has more than one reactive group, it will contain further groups for opportunity for fixation.
Additional reactive groups do offer the important benefit of potentially increasing the fixation of a dye.
If the probability of fixation of each reactive group is, for example 60%, and if it is assumed that hydrolysis of the first reactive group does not alter the physical or chemical properties of the dye the probability of dye-fibre bond formation of a bifunctional dye is 84%[60+(0.6×40)]. Although all structural stages to a dye impact on its dyeing behavior some extent a multifunctional dye has a fixation potential than a nonfunctional reactive dye.
Potential Problem Due to Dye Hydrolysis
1) Hydrolysis accompanies fixation, resulting in incomplete utilisation of dye. Hence dye wastage occurs. Up to 40%-60% dyes (Avg. 50%) are wasted in this case.
2) Relatively large amounts of electrolyte are required for exhaust, otherwise dye hydrolysis will occur greatly in dye bath.
3) Laborious removal of unreacted and hydrolysed dye is required – often a longer operation than the dyeing step itself and not always entirely satisfactory.
4) Longer washing operation for removal of unreacted and hydrolyzed dye often costs 50% of total dyeing cost.
5) Hydrolyzed dye is discharged as coloured effluent, and effluent cost is risen up. Moreover, Color is not easily removed by effluent treatment processes and in many cases the dyes are not readily biodegradable
6) Hydrolyzed, unfixed halo heterocyclic reactive dyes may pose an environmental hazard (AOX).
7) De spite reactive dyes being covalently bound to the substrate, fastness problems associated can occur due to hydrolysis.
8) Less Storage ability.
9) Trailing Problem for continues dyeing.
10) Running Shade in batch process.
- See more at: http://textileapex.blogspot.com/2014/08/hydrolysis-of-reactive-dye_87.html#sthash.nG1wYPG5.dpuf