The 5400 Series comes standard with an open center hydraulic system capable of supplying 15 gpm to the remotes.
If additional flow is required for an application the optional combined flow, open center hydraulic system will deliver 26 gallon per minute to the remotes; Cab tractors are available with load sensing, closed center 29 gallon per minute hydraulics (not available on MF5450)
The open center 15 gallon per minute system uses dual pumps that send high-pressure oil (2,684 psi) to the steering, remotes, and three-point hitch, while additional flow goes to the PTO clutch, PFA, differential lock and transmission.
The combined flow hydraulic system has 34.8 gallons per minute total flow. When the electro-hydraulic combining switch is activated the system will deliver 26.4 gallons per minute to the remotes. This will increase the speed and response time of the hydraulic implement.
The 29 gallon per minute load sensing system is a closed center system that uses an axis hydraulic pump giving the system pressure and flow compensating ability. This allows the operator to designate the amount of flow to each valve. It will allow the option of live third function on an MF900 Series loader if set up with proper equipment.
Two hydraulic remotes are standard and you have the option of adding additional remote valves for a total of four.
The 5400 Series comes standard with an open center hydraulic system capable of supplying 15 gpm to the remotes. If additional flow is required for an application the optional combined flow, open center hydraulic system will deliver 26 gallon per minute to the remotes; Cab tractors are available with load sensing, closed center 29 gallon per minute hydraulics (not available on MF5450) The open center 15 gallon per minute system uses dual pumps that send high-pressure oil (2,684 psi) to the steering, remotes, and three-point hitch, while additional flow goes to the PTO clutch, PFA, differential lock and transmission. The combined flow hydraulic system has 34.8 gallons per minute total flow. When the electro-hydraulic combining switch is activated the system will deliver 26.4 gallons per minute to the remotes. This will increase the speed and response time of the hydraulic implement. The 29 gallon per minute load sensing system is a closed center system that uses an axis hydraulic pump giving the system pressure and flow compensating ability. This allows the operator to designate the amount of flow to each valve. It will allow the option of live third function on an MF900 Series loader if set up with proper equipment. Two hydraulic remotes are standard and you have the option of adding additional remote valves for a total of four.
การแปล กรุณารอสักครู่..