Another main advantage of this system is the cost. As
only a single probe is used for the measurements, then
the required equipment is limited. The ultrasonic part of
the system, including the data acquisition and control
components, costs in the region of a few thousand euros,
which is negligible when compared to the cost of other
P/M inspection tools. On the contrary, the most expensive
part of the system is the industrial robot, but the software
has been designed in such a way that it can be easily
adapted to any robot type. This flexibility allows to either
use an existing robot if they have one or to adapt a second
hand robot. The accuracy required for the inspection is rel-
atively low when talking about industrial robots, so a med-
ium spec robot is suitable for this application.
Another main advantage of this system is the cost. Asonly a single probe is used for the measurements, thenthe required equipment is limited. The ultrasonic part ofthe system, including the data acquisition and controlcomponents, costs in the region of a few thousand euros,which is negligible when compared to the cost of otherP/M inspection tools. On the contrary, the most expensivepart of the system is the industrial robot, but the softwarehas been designed in such a way that it can be easilyadapted to any robot type. This flexibility allows to eitheruse an existing robot if they have one or to adapt a secondhand robot. The accuracy required for the inspection is rel-atively low when talking about industrial robots, so a med-ium spec robot is suitable for this application.
การแปล กรุณารอสักครู่..