2. Materials and methods
2.1. Equipment and materials
Resin XAD-4 and XAD-7 Amberlite were supplied by Rohm and Haas of Gessate (MI). It is designed
for organic compound removal from wastewaters. Methanol and acetone were distilled to treat resin and
extract organic compounds accumulated by resin column. Other regents such as hydrochloric acid (HCl)
and sodium sulphate (Na2SO4) were AR grade. Activated carbon, haydite and quartz sand were washed
by ultra pure water for several times, and then dried at 500??
2.2. Experiment
2.2.1. Water sample collection
Tap water was collected from Jinan in China. A barrel made of polyethylene with volume of 25L was
used to collect the water. Three adsorption column filled with activated carbon, haydite and quartz sand
were prepared to remove organic pollutants in tap water. All of column had a filler volume of 2L. 20L
collected tap water was pumped into column by a peristaltic pump and the contact time was controlled in
1h [18]. In this experiment, we used sample 1, sample 2 and sample 3 to represent water samples treated
by activated carbon, haydite and quartz sand column respectively, corresponding to their raw water
sample a, b and c. All water samples were adjust to pH
2. วัสดุและวิธีการ2.1. อุปกรณ์และวัสดุยาง XAD-4 และ Amberlite XAD-7 ได้ให้โรมและทางของ Gessate (MI) มันถูกออกแบบมาสำหรับเอาผสมอินทรีย์จาก wastewaters มีกลั่นเมทานอลและอะซีโตนเพื่อรักษายาง และแยกสารอินทรีย์ที่สะสม โดยคอลัมน์เรซิน รีเจนท์อื่น ๆ เช่นกรดไฮโดรคลอริก (HCl)และโซเดียมซัลเฟต (Na2SO4) มี AR เกรด คาร์บอน haydite และควอตซ์ทรายถูกล้างโดยน้ำบริสุทธิ์สำหรับหลายครั้ง และอบแห้ง 500 ??2.2 การทดลอง2.2.1 เก็บตัวอย่างน้ำน้ำประปารวบรวมจากจี่หนานในประเทศจีน มีกระบอกที่ทำจากพลาสติก มีปริมาตร 25Lใช้เก็บน้ำ สามคอลัมน์ดูดซับเต็มไป ด้วยคาร์บอน haydite และควอตซ์ทรายได้เตรียมพร้อมที่จะเอาสารมลพิษอินทรีย์ในน้ำประปา คอลัมน์ทั้งหมดมีปริมาณสารเติม 2 L. 20Lน้ำประปาเรียกเก็บถูกสูบลงในคอลัมน์ โดยปั๊ม peristaltic และเวลาติดต่อถูกควบคุมใน1h [18] ในการทดลองนี้ เราใช้ตัวอย่าง 1, 2 ตัวอย่าง และตัวอย่างที่ 3 แสดงตัวอย่างน้ำที่ถือว่าโดยคาร์บอน haydite และควอตซ์ทรายคอลัมน์ตามลำดับ ที่สอดคล้องกับของน้ำดิบตัวอย่าง a, b และ c ตัวอย่างน้ำทั้งหมดถูกปรับ pH < 2 ก่อนอุดมไป ด้วยเรซิ่น XAD2.2.2 การ pretreatment ของเรซินเนื่องจากอาจมีบางสิ่งสกปรกในเรซิ่น XAD ได้รับ ทำความสะอาดทำการใช้วิธีนี้: ล้างจำนวนเรซิ่นสองเท่า โดยอุปกรณ์กรองน้ำ deionizedThen mixed two kinds of resin and soaked them in distilled methanol and acetone for more than 12hrespectively. At last, filtered the liquid and stored the resin in methanol to prevent the introduction of anyimpurities until use.2.2.3. Enrichment of organic pollutant in water samplesPreparation of enrichment column: Resin - methanol mixture was filled into the glass column withdiameter of 2 cm and glass wool at the bottom of the column. After methanol flowed out of the columnand resin phase reached 12cm, the column was washed by pure water for several times. The fillingprocess of column requires uniform and bubble-free.After enrichment column was prepared, watersample which was adjusted to pH< 2 was pumped into the column with the flow rate of 30 mL/min.2.2.4. Organic pollutant extractionA methanol – acetone mixed liquor with methanol - acetone volume ratio of 7:3 was used as extract.The organic pollutant enriched in column need wash by extract for three times, and the soaking time was60min, 30min and 15min respectively. After that, the solution was discharged with the flow rate between
การแปล กรุณารอสักครู่..
