of the available screen in the factory proved to be very efficient in removing most of the particulates and organic matters,as indicated by the percentage removal of TSS (72%), COD (75%) and BOD (65.6%). The screened effluent was subjected then to a plain sedimentation for two hours. Although the results indicated a great improvement in the quality of the primary treated effluent, the residual values of TSS, COD and BOD still did not comply with the National regulatory standards for wastewater discharge into the public sewage network.
Screening followed by chemical coagulation/sedimentation process using the pre-determined optimum doses of alum(130 -150 mg/l), adied with 5 mg/l cationic polymer and at the optimum pH of -6.2+_0.2 resulted a good quality of the treated effluent. However, in some cases, some particulates were floated during the sedimentation process. Accordingly, dissolved air flotation using alum and the cationic polymer has been recommended [8]. Fig. 2 shows thr schematic diagram of the proposed treatment train.