To have a comparative account on the size and shape of the pellets obtained under all the
optimized growth conditions (pH 6, 200 rpm, 25 °C, and 5 %(v/v) inoculum size), SEM
analysis was also carried out for those pellets. As can be seen in the Fig. 6d, e, the pellets
almost maintained uniformity in their size and shape. The pellet diameter measured was 0.440
±0.05 mm. The reduction (∼55 %) in pellet diameter was very significant in terms of FA
production. Hyphal diameter remained almost unchanged (3±0.8 μm, Fig. 6f). The structural
intactness with reduced diameter (from 1 to 0.4 mm) regulated by the inoculum volume was an
important finding of the present study.
From the process optimization experiments done in this study, the best growth conditions
for R. oryzae 1526 could be summarized as pH 6, 200 rpm, 25 °C, 5 % (v/v) of inoculum size,
and TSC of 25 g/L. With these optimized conditions, the maximum concentration of FA
obtained was 31.3±2.77 g/L. Considering that FA was being produced from a waste biomass
without any supplementation of nutrients, the FA production level was quite high.
To have a comparative account on the size and shape of the pellets obtained under all theoptimized growth conditions (pH 6, 200 rpm, 25 °C, and 5 %(v/v) inoculum size), SEManalysis was also carried out for those pellets. As can be seen in the Fig. 6d, e, the pelletsalmost maintained uniformity in their size and shape. The pellet diameter measured was 0.440±0.05 mm. The reduction (∼55 %) in pellet diameter was very significant in terms of FAproduction. Hyphal diameter remained almost unchanged (3±0.8 μm, Fig. 6f). The structuralintactness with reduced diameter (from 1 to 0.4 mm) regulated by the inoculum volume was animportant finding of the present study.From the process optimization experiments done in this study, the best growth conditionsfor R. oryzae 1526 could be summarized as pH 6, 200 rpm, 25 °C, 5 % (v/v) of inoculum size,and TSC of 25 g/L. With these optimized conditions, the maximum concentration of FAobtained was 31.3±2.77 g/L. Considering that FA was being produced from a waste biomasswithout any supplementation of nutrients, the FA production level was quite high.
การแปล กรุณารอสักครู่..

มีบัญชีเปรียบเทียบกับขนาดและรูปทรงของเม็ดที่ได้รับภายใต้ทุกสภาวะการเจริญเติบโตที่ดีที่สุด (pH 6, 200 รอบต่อนาที, 25 ° C, และ 5% (v / v) ขนาดหัวเชื้อ) SEM วิเคราะห์ก็ยังดำเนินการสำหรับ เม็ดเหล่านั้น ที่สามารถเห็นได้ในรูป 6d, E, เม็ดเกือบจะเก็บรักษาความสม่ำเสมอในขนาดและรูปร่างของพวกเขา เส้นผ่าศูนย์กลางเม็ดวัดเป็น 0.440 ± 0.05 มิลลิเมตร การลดลง (~55%) มีขนาดเส้นผ่าศูนย์กลางเม็ดอย่างมีนัยสำคัญมากในแง่ของเอฟเอคัผลิต เส้นผ่าศูนย์กลาง hyphal ยังคงอยู่เกือบไม่เปลี่ยนแปลง (3 ± 0.8 ไมโครเมตรรูปที่. 6) โครงสร้างintactness ที่มีขนาดเส้นผ่าศูนย์กลางที่ลดลง (1-0.4 มิลลิเมตร) ควบคุมโดยปริมาณเชื้อที่ถูกค้นพบที่สำคัญของการศึกษาในปัจจุบัน. จากการทดลองการเพิ่มประสิทธิภาพกระบวนการทำในการศึกษาครั้งนี้ที่ดีที่สุดสภาวะการเจริญเติบโตสำหรับอาร์ oryzae 1526 สรุปได้ พีเอช 6, 200 รอบต่อนาที, 25 ° C, 5% (v / v) ขนาดหัวเชื้อ, และทีเอสซี 25 กรัม / ลิตร ด้วยเงื่อนไขที่ดีที่สุดเหล่านี้ความเข้มข้นสูงสุดของเอฟเอที่ได้รับเป็น 31.3 ± 2.77 กรัม / ลิตร พิจารณาว่าเอฟเอได้รับการผลิตจากชีวมวลของเสียโดยไม่ต้องเสริมสารอาหารใด ๆ ที่ระดับการผลิตเอฟเอค่อนข้างสูง
การแปล กรุณารอสักครู่..

ต้องมีบัญชีเปรียบเทียบขนาดและรูปร่างของเม็ดที่ได้รับภายใต้เงื่อนไขที่ดีที่สุดของทั้งหมด
( pH 6 , 200 รอบต่อนาทีที่ 25 ° C และ 5% ( v / v ) โดยขนาด ) , การวิเคราะห์ SEM
ดำเนินการสำหรับเม็ดนั้น ที่สามารถเห็นได้ในรูปที่ 6 D , E , เม็ด
รักษาเกือบความสม่ำเสมอในขนาดและรูปร่างของตน เม็ดเส้นผ่าศูนย์กลางวัดที่ 0.440
± 0.05 มิลลิเมตรการลด ( ∼ 55% ) ในเส้นผ่าศูนย์กลางเม็ดถูกมากๆ ในแง่ของการผลิตฟ้า
ขนาดเส้นผ่าศูนย์กลางเส้นใยยังคงไม่เปลี่ยนแปลงเกือบ ( 3 ± 0.8 μ M , มะเดื่อ 6F ) การ intactness โครงสร้าง
ด้วยขนาดเส้นผ่านศูนย์กลางลดลง ( จาก 1 ถึง 0.4 มม. ) การควบคุมโดยปริมาณเชื้อเป็น
หาสําคัญของการศึกษา .
จากกระบวนการเพิ่มประสิทธิภาพการทดลองทำในการศึกษาที่ดีที่สุดสำหรับการเจริญเติบโตเงื่อนไข
Roryzae 1526 สามารถสรุปเป็นพีเอช 6 , 200 รอบต่อนาทีที่ 25 ° C , 5% ( v / v )
3 ขนาด , และ 25 กรัม / ลิตร สารเหล่านี้ปรับสภาพค่าความเข้มข้นสูงสุดของฟา
ได้รับเช่น± 2.77 กรัม / ลิตร พิจารณาว่า เอฟเอ ยังถูกผลิตจากขยะชีวมวล
ไม่มีการเสริมสารอาหาร เอฟเอ การผลิตอยู่ในระดับค่อนข้างสูง
การแปล กรุณารอสักครู่..
