The pharmaceutical industry often generates wastewater that is hazardous and toxic, and also often has intensive color and disgusting odor. The presence of pharmaceuticals in the effluent of sewage treatment plants (STPs), present a challenge for biological treatment technologies, because of the toxicity of antibiotics for microbes and also the death of micro-organisms which are effective in wastewater [1] and [2]. Hence, biological treatment of wastewater is insufficient in the case of antibiotics; therefore they can eventually reach drinking water, surface and groundwater waters and soil and lead to the development of resistance of microbial pathogens to antibiotics [3], [4] and [5]. Therefore a pretreatment process is often required prior to discharge into the sewage treatment system [6]. The Azithromycin (Formula: C38H69NO13, Brand names: Zithromax, Sumamed, Zitrocin), is a member of the macrolide antibiotics that is more effective in destroying gram negative bacteria, especially Haemophilus influenza. Azithromycin demonstrates very low solubility in water; it can be removed using some common physical treatment processes, including coagulation and flocculation [7]. But since these processes are largely ineffective for removing dissolved organic contaminants and also because biological treatment processes have no effect on the amount of the medicine, the medicine leaves the sewage treatment plant without any change in amount occurring during secondary treatment [8]. As a result, it is essential that processes be used that can reduce the amount of this medicine in the wastewater. One of the new technologies used in the treatment of water supplies and industrial sewage containing toxic material is advanced oxidation process (AOPs). These processes are based on the production of hydroxyl radicals which demonstrate great efficacy in breaking down organic material. The efficacy of the various AOPs depends both on the rate of the generation of the hydroxyl radical (radical dotOH) and the amount of contact between the hydroxyl radical and the organic compound [9], [10] and [11]. The hydroxyl radical is responsible for the destruction of organic pollutants and is capable of mineralizing them ultimately to CO2 and H2O. A Fenton process is AOPs that can be used to treat non biodegradable wastewater. A Fenton system uses Fe2+ in reaction with H2O2, at optimum pH to produce radical dotOH for the destruction of the organic pollutants. The Fenton treatment process not only leads to oxidation, but also to coagulation by the formation of Fe (OH)3. In a Fenton process, chemical coagulation acts as a refining step after Fenton oxidation [12], [13] and [14]. The important reactions are as follows:
อุตสาหกรรมเภสัชกรรมมักจะสร้างระบบบำบัดน้ำเสียที่เป็นอันตราย และเป็นพิษ และมักมีสีเข้มข้นและกลิ่นน่าขยะแขยง ของยาในน้ำทิ้งของโรงบำบัดน้ำเสีย (STPs), นำเสนอความท้าทายสำหรับเทคโนโลยีการบำบัดทางชีวภาพ ความเป็นพิษของยาปฏิชีวนะสำหรับจุลินทรีย์และการตายของไมโครสิ่งมีชีวิตที่มีประสิทธิภาพในการบำบัดน้ำเสีย [1] และ [2] ดังนั้น บำบัดน้ำเสียทางชีวภาพเพียงพอในกรณีของยาปฏิชีวนะ ดังนั้น พวกเขาสามารถในที่สุดเข้าถึงน้ำดื่ม ผิว และน้ำบาดาลน้ำดิน และนำไปสู่การพัฒนาความต้านทานของโรคจุลินทรีย์กับยาปฏิชีวนะ [3], [4] [5] จึง เป็นกระบวนการ pretreatment เป็นบ่อยก่อนต้องปลดเป็นระบบบำบัดน้ำเสีย [6] Azithromycin (สูตร: C38H69NO13 ยี่ห้อ: Zithromax, Sumamed, Zitrocin), เป็นสมาชิกของยาปฏิชีวนะแมคโคไรด์ที่มีประสิทธิภาพในการทำลายแบคทีเรียกรัมลบ โดยเฉพาะอย่างยิ่ง Haemophilus ไข้หวัดใหญ่ Azithromycin สำแดงราคาต่ำมากละลายในน้ำ มันสามารถถูกใช้ทั่วไปการรักษาทางกายภาพกระบวนการบางอย่าง flocculation [7] และการแข็งตัวของเลือด แต่เนื่องจากกระบวนการเหล่านี้มีผลมากใน การเอาส่วนยุบสารปนเปื้อนอินทรีย์ และยัง เนื่องจากกระบวนการบำบัดชีวภาพไม่มีผลต่อจำนวนของยา ยาออกจากโรงบำบัดน้ำเสีย โดยไม่มีการเปลี่ยนแปลงใด ๆ ในจำนวนเงินที่เกิดขึ้นในระหว่างการรักษารอง [8] ดังนั้น จึงสำคัญที่ว่า ใช้กระบวนการที่สามารถลดขนาดของยานี้ในการบำบัดน้ำเสีย หนึ่งในเทคโนโลยีใหม่ที่ใช้ในการบำบัดน้ำและน้ำเสียอุตสาหกรรมที่ประกอบด้วยวัสดุที่เป็นพิษเป็นขั้นสูงกระบวนการออกซิเดชัน (AOPs) กระบวนการเหล่านี้จะขึ้นอยู่กับการผลิตของอนุมูลไฮดรอกซิลซึ่งแสดงให้เห็นถึงประสิทธิภาพที่ดีในการแบ่งวัสดุอินทรีย์ ประสิทธิภาพของ AOPs ต่าง ๆ ขึ้นทั้งอัตราการสร้างไฮดร (รุนแรง dotOH) และจำนวนของผู้ติดต่อระหว่างรัศมีไฮดรอกซิลและในสารประกอบอินทรีย์ [9], [10] [11] และ รับผิดชอบสำหรับการทำลายของสารมลพิษอินทรีย์รัศมีไฮดรอกซิล และมีความสามารถในการ mineralizing สุด CO2 และ H2O กระบวนการ Fenton AOPs ที่สามารถใช้บำบัดน้ำเสียสลายไม่ได้ ระบบ Fenton ใช้ Fe2 + ในปฏิกิริยามี H2O2 ที่ pH เหมาะสม dotOH รุนแรงสำหรับการทำลายของสารมลพิษอินทรีย์ที่ผลิต การรักษา Fenton ไม่เพียงนำ การออกซิเดชัน แต่ การแข็งตัวของเลือด โดยการก่อตัวของ Fe (OH) 3 ในกระบวนการ Fenton เฟนเคมีทำหน้าที่เป็นขั้นตอนการกลั่นหลัง Fenton ออกซิเดชัน [12], [13] [14] และ ปฏิกิริยาที่สำคัญมีดังนี้:
การแปล กรุณารอสักครู่..
