Is to prepera the building pad a waffle matte foundation site directly on grade.
So all that’s needed to start is a clean and level building surface.
No pre soaking in necessary with the system step 2.
Install your underground untilities this task is much easier with one fomat.
Because the trencthing does not have to go under any inground .
Ribs or deepened foothings step 3.
Place the parameter for work right on grade step 4.
Is to lay out the waffle boxes these are patented.
Interlocking plastic forms they create voids in the foundation.
Strong enough to walk on they connect together at the top and bottom.
With plastic clips supplied with the waffle matt system.
There is only one way waffle boxes can be installed.
Insuring each waffle matte foundation is laid out cerractly.
And to code step 5.
Install the reinforcing steel the waffle mac clips.
Support rebar or port tensioning cables in the correct position.
Erery time guaranteeing proper layout and maximum slabs strength.
Spep 6 . with ereryting in place.
And inspected or your concrete inured I’m.
It’s that simple .
Now there are two key features that set wafer matt apart from all other.
Foundation systems.
And other reasone it delivers superior performance.
First even though waffle map provides a very stiff croos – section per cubic yard .
Of concrete.
It has less contact area with the underlying soil.
When compared to all other slaps on ground and less contact area means less up lift pressure on the waffle matt slap .