Citronella oil (CO) has been reported to possess a mosquito-repellent action. However, its application in topical preparations is limited due to its rapid volatility. The objective of this study was therefore to reduce the rate of evaporation of the oil via microencapsulation. Microcapsules (MCs) were prepared using gelatin simple coacervation method and sodium sulfate (20%) as a coacervating agent. The MCs were hardened with a cross-linking agent, formaldehyde (37%). The effects of three variables, stirring rate, oil loading and the amount of cross-linking agent, on encapsulation efficiency (EE, %) were studied. Response surface methodology was employed to optimize the EE (%), and a polynomial regression model equation was generated. The effect of the amount of cross-linker was insignificant on EE (%). The response surface plot constructed for the polynomial equation provided an optimum area. The MCs under the optimized conditions provided EE of 60%. The optimized MCs were observed to have a sustained in vitro release profile (70% of the content was released at the 10th hour of the study) with minimum initial burst effect. Topical formulations of the microencapsulated oil and non-microencapsulated oil were prepared with different bases, white petrolatum, wool wax alcohol, hydrophilic ointment (USP) and PEG ointment (USP). In vitro membrane permeation of CO from the ointments was evaluated in Franz diffusion cells using cellulose acetate membrane at 32 °C, with the receptor compartment containing a water–ethanol solution (50:50). The receptor phase samples were analyzed with GC/MS, using citronellal as a reference standard. The results showed that microencapsulation decreased membrane permeation of the CO by at least 50%. The amount of CO permeated was dependent on the type of ointment base used; PEG base exhibited the highest degree of release. Therefore, microencapsulation reduces membrane permeation of CO while maintaining a constant supply of the oil.
น้ำมันตะไคร้หอม (CO) ได้รับการรายงานให้มีการดำเนินการยุงขับไล่ อย่างไรก็ตาม, การประยุกต์ใช้ในการเตรียมการเฉพาะจะถูกจำกัดเนื่องจากความผันผวนอย่างรวดเร็ว. วัตถุประสงค์ของการศึกษานี้จึงลดอัตราการระเหยของน้ำมันผ่าน microencapsulation ไมโครแคปซูล (MCs) ถูกเตรียมโดยใช้วิธีการที่เรียบง่ายวุ้นและโซเดียมซัลเฟต (20%) เป็นตัวแทน MCs ถูกทำให้แข็งแกร่งด้วยตัวแทนการลิงก์ข้าม, ฟอร์มาลดีไฮด์ (๓๗%). ผลกระทบของสามตัวแปร, อัตราการกวน, การบรรทุกน้ำมันและจำนวนของตัวแทนการเชื่อมโยงข้าม, บนห่อหุ้มประสิทธิภาพ (EE,%) ได้รับการศึกษา วิธีการพื้นผิวตอบสนองถูกนำมาใช้เพื่อเพิ่มประสิทธิภาพ EE (%) และสมการแบบจำลองการถดถอยพหุนามถูกสร้างขึ้น ผลของจำนวนของตัวเชื่อมโยงหลายไม่มีนัยสำคัญบน EE (%) พื้นผิวการตอบสนองที่สร้างขึ้นสำหรับสมการพหุนามให้พื้นที่ที่เหมาะสม ภายใต้เงื่อนไขที่ปรับให้เหมาะสมที่กำหนดให้ EE ของ๖๐% มีการปฏิบัติงานที่ดีที่สุดเพื่อให้มีการต่อเนื่องในรายละเอียดการเผยแพร่ของหลอดทดลอง (๗๐% ของเนื้อหาได้รับการปล่อยตัวในชั่วโมงที่10ของการศึกษา) ที่มีผลกระทบขั้นต่ำเริ่มต้นระเบิด สูตรเฉพาะของน้ำมันสารและน้ำมันที่ไม่ได้รับการเตรียมพร้อมกับฐานที่แตกต่างกัน, petrolatum สีขาว, เครื่องดื่มแอลกอฮอล์ขี้ผึ้งขนแกะ, ครีมไฮโดร philic (usp) และ PEG ครีม (usp). ในหลอดทดลองการซึมผ่านของ CO จากขี้ผึ้งได้รับการประเมินในเซลล์การแพร่กระจายของฟรานซ์โดยใช้เมมเบรนเซลลูโลสอะซิเตทที่๓๒° c, ด้วยช่องรับน้ำ–โซลูชั่นเอทานอล (50:50). ตัวอย่างขั้นตอนการรับมีการวิเคราะห์ด้วย GC/MS โดยใช้ตะไคร้หอมเป็นมาตรฐานอ้างอิง ผลที่ได้แสดงให้เห็นว่า microencapsulation ลดการซึมผ่านเมมเบรนของ CO โดยอย่างน้อย๕๐% จำนวนของการซึมผ่านของ CO ขึ้นอยู่กับชนิดของฐานครีมที่ใช้; ฐาน PEG จะแสดงระดับการปล่อยสูงสุด ดังนั้น, microencapsulation ลดการซึมผ่านเมมเบรนของ CO ในขณะที่รักษาอุปทานคงที่ของน้ำมัน.
การแปล กรุณารอสักครู่..
