Let's take a second to examine what is inside a ballast. There really isn't much, especially depending on which type of light you buy. A HPS ballast consists of 3 parts: The transformer, the capacitor and the igniter. A metal halide generally has just the transformer and capacitor.
Every single one of these parts is available at pretty much any lighting or electrical supply warehouse, including the bulb and socket. Break out the phone book and look in the yellow pages under "lighting". Call them and ask if they carry "Transformer, capacitor, igniter (if for HPS), and socket" for whatever size (150, 400, 1000, etc) and type (Metal halide or High pressure sodium) light you wish to purchase. Odds are, they will have it. If not, try another store until you find the one which has what you want. You can also order this stuff from many online electrical supply places. There is virtually no worry about having this stuff shipped to your house, since it did not come from a "high profile" hydro shop.
When you get to the store, you are going to ask for the ballast components, a socket and bulb in whatever size and type you want. The person working there will probably ask you what voltage you need. This is important because the ballast has to be made to run on the voltage at your house. Most houses in the US are wired for 120 volts. So that is the rating you need for your parts. If your house happens to have a different voltage (say, 210) then you need the corresponding ballast parts. Find out if your house has a voltage different than 120 before you get to the store. Another option is to purchase what is known as a "multi-tap" ballast. This type has a special wire inside which you move around and attach in one spot or another depending on the voltage of your house. Some stores may only carry multi-tap ballasts to save money on stock. No matter. A multi-tap ballast will work fine in any situation. Multi-tap ballasts usually have the following options inside: 120/208/240 and 277 volts.
Besides the Transformer, igniter, capacitor, bulb and socket, you are going to also need the following:
About 20 feet of 14 (or better) gauge wire
A "male" plug set
About 8 "wire nuts
Let's take a second to examine what is inside a ballast. There really isn't much, especially depending on which type of light you buy. A HPS ballast consists of 3 parts: The transformer, the capacitor and the igniter. A metal halide generally has just the transformer and capacitor.
Every single one of these parts is available at pretty much any lighting or electrical supply warehouse, including the bulb and socket. Break out the phone book and look in the yellow pages under "lighting". Call them and ask if they carry "Transformer, capacitor, igniter (if for HPS), and socket" for whatever size (150, 400, 1000, etc) and type (Metal halide or High pressure sodium) light you wish to purchase. Odds are, they will have it. If not, try another store until you find the one which has what you want. You can also order this stuff from many online electrical supply places. There is virtually no worry about having this stuff shipped to your house, since it did not come from a "high profile" hydro shop.
When you get to the store, you are going to ask for the ballast components, a socket and bulb in whatever size and type you want. The person working there will probably ask you what voltage you need. This is important because the ballast has to be made to run on the voltage at your house. Most houses in the US are wired for 120 volts. So that is the rating you need for your parts. If your house happens to have a different voltage (say, 210) then you need the corresponding ballast parts. Find out if your house has a voltage different than 120 before you get to the store. Another option is to purchase what is known as a "multi-tap" ballast. This type has a special wire inside which you move around and attach in one spot or another depending on the voltage of your house. Some stores may only carry multi-tap ballasts to save money on stock. No matter. A multi-tap ballast will work fine in any situation. Multi-tap ballasts usually have the following options inside: 120/208/240 and 277 volts.
Besides the Transformer, igniter, capacitor, bulb and socket, you are going to also need the following:
About 20 feet of 14 (or better) gauge wire
A "male" plug set
About 8 "wire nuts
การแปล กรุณารอสักครู่..
![](//thimg.ilovetranslation.com/pic/loading_3.gif?v=b9814dd30c1d7c59_8619)
ลองดูที่สองเพื่อตรวจสอบสิ่งที่อยู่ภายในบัลลาสต์ มีจริงๆไม่มากเท่าไหร่ โดยเฉพาะ ซึ่งขึ้นอยู่กับชนิดของแสงที่คุณซื้อ เป็นบัลลาสต์ HPS ประกอบด้วย 3 ส่วน : หม้อแปลง , ตัวเก็บประจุ และไฟ เฮไลด์โลหะโดยทั่วไปมีเพียงหม้อแปลงไฟฟ้าและตัวเก็บประจุ
ทุกหนึ่งเดียวของชิ้นส่วนเหล่านี้สามารถใช้ได้ที่ สวยมากๆ แสง หรือ โกดัง ไฟฟ้าประปารวมทั้งหลอดไฟและซ็อกเก็ต แบ่งออกสมุดโทรศัพท์และดูในสมุดหน้าเหลืองภายใต้ " แสงสว่าง " เรียกพวกเขาและถามว่าพวกเขามี " หม้อแปลง , ตัวเก็บประจุไฟ ( หาก HPS ) และซ็อกเก็ต " ไม่ว่าขนาด ( 150 , 400 , 1000 , ฯลฯ ) และประเภท ( โลหะเฮไลด์หรือโซเดียมความดันสูง ) แสงที่คุณต้องการซื้อ ราคาต่อรองได้นะคะ ถ้าไม่ลองร้านอื่นจนกว่าคุณจะพบหนึ่งที่มีสิ่งที่คุณต้องการ นอกจากนี้คุณยังสามารถสั่งซื้อของพวกนี้จากสถานที่ไฟฟ้าประปาออนไลน์มากมาย มีจวนไม่มีกังวลมีสิ่งนี้จัดส่งไปที่บ้านของคุณ เพราะมันไม่ได้มาจาก " โปรไฟล์ " สูงสำหรับร้าน
เมื่อคุณไปที่ร้าน คุณจะถามสำหรับบัลลาสต์ส่วนประกอบซ็อกเก็ตหลอดไฟใด และขนาดและชนิดที่คุณต้องการ คนที่ทำงานที่นั่นอาจจะถามคุณศักดา คุณต้องการอะไร นี้เป็นสิ่งสำคัญเพราะบัลลาสต์จะให้วิ่งบนไฟฟ้าที่บ้านของคุณ บ้านส่วนใหญ่ในสหรัฐฯ เป็นสาย 120 โวลต์ นั่นเป็นคะแนนที่คุณต้องการสำหรับส่วนของคุณ ถ้าบ้านคุณจะมีแรงดันไฟฟ้าที่แตกต่างกัน ( พูด210 ) แล้วคุณต้องการชิ้นส่วนของบัลลาสต์ที่สอดคล้องกัน หากบ้านของคุณมีแรงดันไฟฟ้าที่แตกต่างกันกว่า 120 ก่อนที่คุณจะได้รับในการจัดเก็บ อีกตัวเลือกหนึ่งคือการซื้อสิ่งที่เรียกว่า " มัลติแท็ป " บัลลาสต์ ชนิดนี้มีพิเศษสายภายในซึ่งคุณย้ายไปรอบ ๆและแนบในหนึ่งจุดหรืออื่นขึ้นอยู่กับแรงดันของบ้านของคุณบางร้านอาจจะแค่ถือหลายเคาะบัลลาสต์เพื่อประหยัดเงินใน Stock ไม่ว่าเรื่องอะไร บัลลาสต์แตะมัลติจะทำงานได้ดีในสถานการณ์ใด ๆ หลายเคาะบัลลาสต์มักจะมีตัวเลือกในต่อไปนี้ : 120 / 208 / 240 และ 277 โวลต์
นอกจากหม้อแปลง , หลอดไฟ , ตัวเก็บประจุและซ็อกเก็ต , คุณจะต้องดังต่อไปนี้ :
ประมาณ 20 ฟุตของ 14 ( หรือดีกว่า ) สายไฟชุด
" ชาย " เสียบ8 เกี่ยวกับ " ลวดถั่ว
การแปล กรุณารอสักครู่..
![](//thimg.ilovetranslation.com/pic/loading_3.gif?v=b9814dd30c1d7c59_8619)