Dispersions of GBF (20%, w/
w) were pregelatinized with stirring in a boiling water bath for
15 min. The pastewas then autoclaved (Tomy Kogyo Co., Ltd., Tokyo,
Japan) for 30 min at 121 C and suspended with Milli-Q water to
obtain 10% (w/w) gel. After cooling to 50 C, pullulanase (activity of
1508 npun/g, where 1.21 g/mL) at different levels (0, 18, 36, 74, 109
and 146 npun/g GBF) was added. One npun (new pullupanase unit
novo) is defined as the amount of enzyme that releases one mmol
glucose per minute under standard conditions (0.7% red pullulan
(Megazyme), pH 5, 40 C, 20 min). The suspension was stirred for
12 h at 50 C and then autoclaved for 30 min at 121 C. The mixture
was cooled, stored at 4 C for 24 h for annealing and then centrifuged
at 4000 g for 15 min. The residue was freeze-dried, ground
in a pulverizing machine for 90 s and passed through 60-mesh sieve.
The autoclaved/debranched GBF (ADGBF) obtained at optimal level
of pullulanasewas then collected and stored at room temperature in
a sealed plastic bag before further testing.
Dispersions of GBF (20%, w/w) were pregelatinized with stirring in a boiling water bath for15 min. The pastewas then autoclaved (Tomy Kogyo Co., Ltd., Tokyo,Japan) for 30 min at 121 C and suspended with Milli-Q water toobtain 10% (w/w) gel. After cooling to 50 C, pullulanase (activity of1508 npun/g, where 1.21 g/mL) at different levels (0, 18, 36, 74, 109and 146 npun/g GBF) was added. One npun (new pullupanase unitnovo) is defined as the amount of enzyme that releases one mmolglucose per minute under standard conditions (0.7% red pullulan(Megazyme), pH 5, 40 C, 20 min). The suspension was stirred for12 h at 50 C and then autoclaved for 30 min at 121 C. The mixturewas cooled, stored at 4 C for 24 h for annealing and then centrifugedat 4000 g for 15 min. The residue was freeze-dried, groundin a pulverizing machine for 90 s and passed through 60-mesh sieve.The autoclaved/debranched GBF (ADGBF) obtained at optimal levelof pullulanasewas then collected and stored at room temperature ina sealed plastic bag before further testing.
การแปล กรุณารอสักครู่..

กระจายของ GBF (20% w /
w) ถูก pregelatinized กับกวนในอ่างน้ำเดือด
15 นาที pastewas แล้วเบา (Tomy Kogyo จำกัด
โตเกียวญี่ปุ่น) เป็นเวลา 30 นาทีที่ 121 องศาเซลเซียสและระงับด้วยน้ำ Milli-Q
ที่จะได้รับ10% (w / w) เจล หลังจากที่ระบายความร้อนถึง 50 องศาเซลเซียส, pullulanase (กิจกรรม
1508 npun / g ที่ 1.21 กรัม / มิลลิลิตร) ในระดับที่แตกต่างกัน (0, 18, 36, 74, 109
และ 146 npun / g GBF) ถูกเพิ่มเข้ามา หนึ่ง npun (หน่วย pullupanase
ใหม่โนโว) หมายถึงปริมาณของเอนไซม์ที่ออกหนึ่งมิลลิโมลกลูโคสต่อนาทีภายใต้เงื่อนไขมาตรฐาน (0.7% pullulan สีแดง (Megazyme), พีเอช 5, 40 องศาเซลเซียส 20 นาที) ระงับถูกกวนสำหรับ12 ชั่วโมงที่ 50 องศาเซลเซียสและเบาแล้วเป็นเวลา 30 นาทีที่ 121 องศาเซลเซียส ส่วนผสมที่ถูกระบายความร้อนที่เก็บไว้ที่ 4 องศาเซลเซียสเป็นเวลา 24 ชั่วโมงสำหรับการหลอมและปั่นแล้วที่4000? กรัมเป็นเวลา 15 นาที ที่เหลือก็แห้งพื้นดินในเครื่องป่น 90 และผ่านตะแกรง 60 ตาข่าย. เบา / debranched GBF (ADGBF) ที่ได้รับในระดับที่เหมาะสมของpullulanasewas เก็บรวบรวมแล้วและเก็บไว้ที่อุณหภูมิห้องในถุงพลาสติกที่ปิดสนิทก่อนการทดสอบเพิ่มเติม
การแปล กรุณารอสักครู่..

การกระจายของ gbf ( 20% w / w ,
) ซึ่งมีกวนในอ่างน้ำเดือดเป็นเวลา 15 นาที
pastewas แล้วสังเคราะห์ ( โทมี่ โคเกียว จำกัด , โตเกียว ,
ญี่ปุ่น ) ประมาณ 30 นาที ที่อุณหภูมิ 121 องศาเซลเซียส และ ห้อยกับ milli-q น้ำ
ขอรับ 10 % ( w / w ) เจล . หลังจากเย็น 50 C พูลลูแลนเนส ( กิจกรรมและ npun
/ g ที่ 1.21 กรัมต่อมิลลิลิตร ) ในระดับที่แตกต่างกัน ( 0 , 18 , 36 , 74 , 109
146 npun / g gbf ) ถูกเพิ่มเข้ามาหนึ่ง npun ( ใหม่ pullupanase หน่วย
Novo ) หมายถึง ปริมาณของเอนไซม์ที่ปล่อย mmol
กลูโคสหนึ่งต่อนาทีภายใต้สภาวะมาตรฐาน ( 0.7% พูลลูแลนแดง
( megazyme ) , pH 5 , 40 C 20 นาที ) ช่วงล่างที่ถูกกวนให้
12 ชั่วโมง 50 C แล้วสังเคราะห์สำหรับ 30 นาทีที่อุณหภูมิ 121 องศาเซลเซียส ส่วนผสม
จะระบายความร้อนที่อุณหภูมิ 4 องศาเซลเซียสเป็นเวลา 24 ชั่วโมง การหลอมแล้วไฟฟ้า
4000 กรัมเป็นเวลา 15 นาทีตกค้างแห้งบด
ใน pulverizing เครื่อง 90 และผ่าน 60 mesh ตะแกรง สังเคราะห์ /
debranched gbf ( adgbf ) ได้ในระดับที่เหมาะสมของ pullulanasewas แล้ว
รวบรวมและเก็บไว้ที่อุณหภูมิห้องใน
ถุงพลาสติกปิดผนึกก่อนที่จะทดสอบเพิ่มเติม
การแปล กรุณารอสักครู่..
