MATERIAL SAFETY DATA SHEET: WELD-ON 717 FOR PVC SOLVENT
Issue Date: 30.001.09
1. IDENTIFICATION OF PREPARATION AND COMPANY
Product name
Product use
: WELD-ON 717 for PVC Plastic Pipe
: Solvent Cement for PVC Plastic Pipes
Rev: 6
EU Suppliers Name and Address:
International Plastic Systems Limited
Seaham Grange Industrial Estate
Seaham
County Durham
SR7 0PT
Tel: 0191-5213111
Fax: 0191-5213222
2. COMPOSITION / INFORMATION ON INGREDIENTS
Substance
Polyvinyl Chloride Resin (PVC)
Tetrahydrofuran
Methyl Ethyl Ketone
Cyclohexanone
3. HAZARD IDENTIFICATION
Flammable, irritant.
4. FIRST AID MEASURES
Inhalation
If overcome by vapours, remove to fresh air and if breathing stopped, give artificial respiration preferably, mouth-to-mouth.
If breathing is difficult give oxygen. Do not smoke. Obtain medical attention.
Eye contact
Flush eyes with plenty of water for at least 15 minutes. Obtain medical attention.
Skin contact
Remove contaminated clothing and shoes. Wash skin with plenty of soap and water for at least 15 minutes. If irritation
develops, obtain medical attention.
Ingestion
Give 1 or 2 glasses of water or milk. Do not induce vomiting. Obtain immediate medical attention.
5. FIRE-FIGHTING MEASURES
Fire Extinguishing Agents
Water spray, carbon dioxide and dry powder
Special precautions
Evacuate enclosed areas, stay upwind. In confined space use self-contained breathing apparatus, positive pressure
hose masks or airline masks (long-breathers). Use water spray to cool containers, to flush spills from source of ignition and
to disperse vapours.
25-70
5-40
1-15
F, Xi
F, Xi
Xn
R 11-19-36/37 S (2-)16-29-33 109-99-9 203-726-8 603-025-00-0
R 11-36-66/67 S (2-)9-16
R 10-20
S (2-)25
78-93-3
201-159-0 606-002-00-3
Approx % Symbols Risk Phrases Safety Phrases CAS No. EINECS No.
Index no.
108-94-1 203-631-1 606-010-00-7
IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l Tel: 0191 5213111 l www.ipsflowsystems.com
6. ACCIDENTAL RELEASE MEASURES
Eliminate all ignition sources. Avoid breathing of vapours. Wear appropriate protective clothing. Keep liquid out of eyes.
Flush with large amounts of water. Contain liquid with sand or earth. Absorb with sand or non-flammable absorbent
material and transfer into steel drums for recovery or disposal. Prevent liquid from entering the drains soil or groundwater.
If significant material enters surface drains inform local authorities, including fire service.
7. HANDLING AND STORAGE
Store in the shade between 5ºC and 40ºC in a well-ventilated area with adequate means of containment. All handling
equipment should be electrically grounded. Keep away from heat, sparks, open flame or other sources of ignition. Avoid
prolonged breathing of vapour (refer to Exposure Controls). Avoid contact with eyes, skin and clothing. Train employees
on all special handling procedures before they work with this product.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Workplace Exposure Limits
Tetrahydrofuran 50ppm (long term) & 100ppm (short term), can be absorbed through the skin; Methyl Ethyl Ketone
(butanone) 200ppm (long term) & 300ppm (short term); Cyclohexanone 10ppm (long term) & 20ppm (short term), can be
absorbed through the skin.
NOTE: Long term = 8 hour TWA Reference period & Short term = 15 minute reference period
Respiratory Protection
Explosion proof general mechanical ventilation is recommended to maintain vapour concentrations below safe working
limits. In situations where vapour concentrations exceed safe working limits, a self-contained breathing apparatus should
be worn.
Hand protection
PVA coated or nitrile protective gloves
Eye Protection
Splash-proof chemical goggles
Skin Protection
Impervious apron and source of running water to wash eyes or skin in case of contact.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Odour
Boiling Point
Flashpoint
Flammability
Vapour pressure
Vapour density
Specific gravity @ 20ºC
Percentage volatile by volume
Solubility in water
10. STABILITY AND REACTIVITY
Fire hazard because of low flash point and high volatility. Vapours are heavier than air and may travel to source of ignition.
Keep away from heat, sparks, open flame and other sources of ignition.
No reaction with water.
Materials to avoid
Caustics, ammonia, inorganic acids, chlorinated compounds, strong oxidants and isocyanates.
Hazardous Decomposition Products
When forced to burn, this product gives off carbon dioxide, carbon monoxide, hydrogen chloride and smoke.
White or opaque grey medium syrupy liquid
Ethereal
151 F, (67ºC) based on first boiling point component i.e. THF
6 F T.C.C based on first boiling component i.e. THF
Highly Flammable Vapour / air mixture explosive
19.065 KPa at 20°C - based on first boiling component i.e. THF
2.49 (Air = 1)
0.946 ± 0.040
80-90%
Solvent portion completely soluble in water. Resin portion separates out.
IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l Tel: 0191 5213111 l www.ipsflowsystems.com
11. TOXICOLOGICAL INFORMATION
Primary routes of entry
Inhalation and skin contact.
EFFECTS OF OVEREXPOSURE
ACUTE
Inhalation
Severe overexposure may result in nausea, dizziness and headache. Can cause drowsiness, irritation of eyes and nasal
passages.
Skin contact
Skin irritant. Liquid contact may remove natural skin oils resulting in irritation. Dermatitis may occur with prolonged skin
contact.
Skin absorption
Prolonged or widespread exposure may result in severe eye injury with conjunctival inflammation on contact with the
liquid. Vapours slightly uncomfortable.
Ingestion
Moderately toxic. May cause nausea, vomiting, and diarrhoea. May cause mental sluggishness.
CHRONIC
Symptoms of respiratory tract irritation and damage to respiratory epithelium were reported in rats exposed to 5000 ppm
THF for 90 days. Elevation of SGPT suggests a disturbance in liver function. The NOEL was reported to be 200 ppm.
12. ECOLOGICAL INFORMATION
None of the components of the preparation are classified as dangerous to the environment. However care should be
taken to prevent material entering surface drains.
13. DISPOSAL CONSIDERATIONS
Dispose of through local authorities if appropriate facilities are available, otherwise transfer to chemical disposal company.
14. TRANSPORT INFORMATION
Proper Shipping Name Adhesive
UN Number1133
Emergency Action Code 3YE
15. REGULATORY INFORMATION
Symbols
Risk phrases
:
:
F, Xi
R11
R19
R20
R36
R66
R67
S2
S9
S16
S25
S29
S33
Highly flammable
May form explosive peroxides
Harmful by inhalation
Irritating to eyes and respiratory system
Repeated exposure may cause skin dryness or cracking
Vapours may cause drowsiness or dizziness
Keep out of reach of children (obligatory statement if sold to the general public)
Keep container in a well ventilated place
Keep away from sources of ignition - no smoking
Avoid contact with the eyes
Do not empty into drains
Take precautionary measures against static discharges
Class Number
Hazard Identification No
3
33
Pkg. Group
Special Provisions
II
Safety phrases
:
IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l Tel: 0191 5213111 l www.ipsflowsystems.com
16. OTHER INFORMATION
No additional information.
The data contained in this Safety Data Sheet has been supplied as required by the Chemicals (Hazard Identification and
Packaging for Supply) Regulations 2002, as amended, for the purpose of protecting the health and safety of industrial
and commercial users who are deemed capable of understanding and acting on the information provided.
Please ensure that it is passed to the appropriate person(s) in your company, who are capable of acting on the information.
IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l Tel: 0191 5213111 l www.ipsflowsystems.com
MATERIAL SAFETY DATA SHEET: WELD-ON 717 FOR PVC SOLVENT
Issue Date: 30.001.09
1. IDENTIFICATION OF PREPARATION AND COMPANY
Product name
Product use
: WELD-ON 717 for PVC Plastic Pipe
: Solvent Cement for PVC Plastic Pipes
Rev: 6
EU Suppliers Name and Address:
International Plastic Systems Limited
Seaham Grange Industrial Estate
Seaham
County Durham
SR7 0PT
Tel: 0191-5213111
Fax: 0191-5213222
2. COMPOSITION / INFORMATION ON INGREDIENTS
Substance
Polyvinyl Chloride Resin (PVC)
Tetrahydrofuran
Methyl Ethyl Ketone
Cyclohexanone
3. HAZARD IDENTIFICATION
Flammable, irritant.
4. FIRST AID MEASURES
Inhalation
If overcome by vapours, remove to fresh air and if breathing stopped, give artificial respiration preferably, mouth-to-mouth.
If breathing is difficult give oxygen. Do not smoke. Obtain medical attention.
Eye contact
Flush eyes with plenty of water for at least 15 minutes. Obtain medical attention.
Skin contact
Remove contaminated clothing and shoes. Wash skin with plenty of soap and water for at least 15 minutes. If irritation
develops, obtain medical attention.
Ingestion
Give 1 or 2 glasses of water or milk. Do not induce vomiting. Obtain immediate medical attention.
5. FIRE-FIGHTING MEASURES
Fire Extinguishing Agents
Water spray, carbon dioxide and dry powder
Special precautions
Evacuate enclosed areas, stay upwind. In confined space use self-contained breathing apparatus, positive pressure
hose masks or airline masks (long-breathers). Use water spray to cool containers, to flush spills from source of ignition and
to disperse vapours.
25-70
5-40
1-15
F, Xi
F, Xi
Xn
R 11-19-36/37 S (2-)16-29-33 109-99-9 203-726-8 603-025-00-0
R 11-36-66/67 S (2-)9-16
R 10-20
S (2-)25
78-93-3
201-159-0 606-002-00-3
Approx % Symbols Risk Phrases Safety Phrases CAS No. EINECS No.
Index no.
108-94-1 203-631-1 606-010-00-7
IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l Tel: 0191 5213111 l www.ipsflowsystems.com
6. ACCIDENTAL RELEASE MEASURES
Eliminate all ignition sources. Avoid breathing of vapours. Wear appropriate protective clothing. Keep liquid out of eyes.
Flush with large amounts of water. Contain liquid with sand or earth. Absorb with sand or non-flammable absorbent
material and transfer into steel drums for recovery or disposal. Prevent liquid from entering the drains soil or groundwater.
If significant material enters surface drains inform local authorities, including fire service.
7. HANDLING AND STORAGE
Store in the shade between 5ºC and 40ºC in a well-ventilated area with adequate means of containment. All handling
equipment should be electrically grounded. Keep away from heat, sparks, open flame or other sources of ignition. Avoid
prolonged breathing of vapour (refer to Exposure Controls). Avoid contact with eyes, skin and clothing. Train employees
on all special handling procedures before they work with this product.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Workplace Exposure Limits
Tetrahydrofuran 50ppm (long term) & 100ppm (short term), can be absorbed through the skin; Methyl Ethyl Ketone
(butanone) 200ppm (long term) & 300ppm (short term); Cyclohexanone 10ppm (long term) & 20ppm (short term), can be
absorbed through the skin.
NOTE: Long term = 8 hour TWA Reference period & Short term = 15 minute reference period
Respiratory Protection
Explosion proof general mechanical ventilation is recommended to maintain vapour concentrations below safe working
limits. In situations where vapour concentrations exceed safe working limits, a self-contained breathing apparatus should
be worn.
Hand protection
PVA coated or nitrile protective gloves
Eye Protection
Splash-proof chemical goggles
Skin Protection
Impervious apron and source of running water to wash eyes or skin in case of contact.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Odour
Boiling Point
Flashpoint
Flammability
Vapour pressure
Vapour density
Specific gravity @ 20ºC
Percentage volatile by volume
Solubility in water
10. STABILITY AND REACTIVITY
Fire hazard because of low flash point and high volatility. Vapours are heavier than air and may travel to source of ignition.
Keep away from heat, sparks, open flame and other sources of ignition.
No reaction with water.
Materials to avoid
Caustics, ammonia, inorganic acids, chlorinated compounds, strong oxidants and isocyanates.
Hazardous Decomposition Products
When forced to burn, this product gives off carbon dioxide, carbon monoxide, hydrogen chloride and smoke.
White or opaque grey medium syrupy liquid
Ethereal
151 F, (67ºC) based on first boiling point component i.e. THF
6 F T.C.C based on first boiling component i.e. THF
Highly Flammable Vapour / air mixture explosive
19.065 KPa at 20°C - based on first boiling component i.e. THF
2.49 (Air = 1)
0.946 ± 0.040
80-90%
Solvent portion completely soluble in water. Resin portion separates out.
IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l Tel: 0191 5213111 l www.ipsflowsystems.com
11. TOXICOLOGICAL INFORMATION
Primary routes of entry
Inhalation and skin contact.
EFFECTS OF OVEREXPOSURE
ACUTE
Inhalation
Severe overexposure may result in nausea, dizziness and headache. Can cause drowsiness, irritation of eyes and nasal
passages.
Skin contact
Skin irritant. Liquid contact may remove natural skin oils resulting in irritation. Dermatitis may occur with prolonged skin
contact.
Skin absorption
Prolonged or widespread exposure may result in severe eye injury with conjunctival inflammation on contact with the
liquid. Vapours slightly uncomfortable.
Ingestion
Moderately toxic. May cause nausea, vomiting, and diarrhoea. May cause mental sluggishness.
CHRONIC
Symptoms of respiratory tract irritation and damage to respiratory epithelium were reported in rats exposed to 5000 ppm
THF for 90 days. Elevation of SGPT suggests a disturbance in liver function. The NOEL was reported to be 200 ppm.
12. ECOLOGICAL INFORMATION
None of the components of the preparation are classified as dangerous to the environment. However care should be
taken to prevent material entering surface drains.
13. DISPOSAL CONSIDERATIONS
Dispose of through local authorities if appropriate facilities are available, otherwise transfer to chemical disposal company.
14. TRANSPORT INFORMATION
Proper Shipping Name Adhesive
UN Number1133
Emergency Action Code 3YE
15. REGULATORY INFORMATION
Symbols
Risk phrases
:
:
F, Xi
R11
R19
R20
R36
R66
R67
S2
S9
S16
S25
S29
S33
Highly flammable
May form explosive peroxides
Harmful by inhalation
Irritating to eyes and respiratory system
Repeated exposure may cause skin dryness or cracking
Vapours may cause drowsiness or dizziness
Keep out of reach of children (obligatory statement if sold to the general public)
Keep container in a well ventilated place
Keep away from sources of ignition - no smoking
Avoid contact with the eyes
Do not empty into drains
Take precautionary measures against static discharges
Class Number
Hazard Identification No
3
33
Pkg. Group
Special Provisions
II
Safety phrases
:
IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l Tel: 0191 5213111 l www.ipsflowsystems.com
16. OTHER INFORMATION
No additional information.
The data contained in this Safety Data Sheet has been supplied as required by the Chemicals (Hazard Identification and
Packaging for Supply) Regulations 2002, as amended, for the purpose of protecting the health and safety of industrial
and commercial users who are deemed capable of understanding and acting on the information provided.
Please ensure that it is passed to the appropriate person(s) in your company, who are capable of acting on the information.
IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l Tel: 0191 5213111 l www.ipsflowsystems.com
การแปล กรุณารอสักครู่..
Mass : weld-on 717 สำหรับพีวีซีตัวทำละลายวันที่ออก : 30.001.09
1 การศึกษาการเตรียมและบริษัท
: ชื่อสินค้าใช้สินค้า weld-on 717 สำหรับพีวีซีพลาสติกท่อ
: ซีเมนต์ตัวทําละลายพลาสติกพีวีซีท่อ
6
ชื่อของสหภาพยุโรปและซัพพลายเออร์ระบบพลาสติกอินเตอร์เนชั่นแนลจำกัดที่อยู่ :
Seaham Seaham
ของอุตสาหกรรมอสังหาริมทรัพย์ sr7 0pt ซัสเซ็กซ์
Tel : 0191-5213111
โทรสาร : 0191-5213222
2 .องค์ประกอบ / ข้อมูลเกี่ยวกับส่วนผสม
สารไวนิลคลอไรด์เรซิน ( PVC ) เตตระไฮโดรฟแรน
ทำให้เมทิลเอทิลคีโตน
3 ไวไฟระคายเคืองบ่งอันตราย
, .
4 มาตรการปฐมพยาบาล
ถ้าเอาชนะโดยการสูดดมไอระเหยออกอากาศสด และถ้าหยุดหายใจผายปอดเด่นกว่าปาก .
ถ้าหายใจยังยากให้ออกซิเจน ไม่สูบบุหรี่ได้รับความสนใจทางการแพทย์ สบตา
ล้างตาด้วยน้ำปริมาณมากอย่างน้อย 15 นาที ได้รับความสนใจทางการแพทย์
ติดต่อผิวลบปนเปื้อนเสื้อผ้าและรองเท้า ล้างผิวที่มีมากมายของน้ำและสบู่เป็นเวลาอย่างน้อย 15 นาที ถ้าระคายเคือง
พัฒนา ได้รับความสนใจทางการแพทย์
ให้ดื่มน้ำหรือนม 1 หรือ 2 แก้ว ไม่ชวนอาเจียน ได้รับความสนใจทางการแพทย์ทันที .
5 . มาตรการ
น้ำพ่นสารดับเพลิงดับเพลิงคาร์บอนไดออกไซด์ และผงแห้ง
พิเศษ ป้องกัน อพยพพื้นที่ปิดล้อม พักลมต้าน ในพื้นที่แคบใช้ในเครื่องช่วยหายใจแรงดันบวก
, หน้ากากท่อหรือหน้ากากของสายการบิน ( ยาว breathers ) ใช้พ่นน้ำให้เย็นภาชนะล้างรั่วไหลจากแหล่งของการจุดระเบิดและ
กระจายไอระเหย 25-70 เลือด
1-15 F , ซีเอฟ ซี ซิน
r 11-19-36 / 37 ( 2 ) 16-29-33 109-99-9 203-726-8 603-025-00-0
r 11-36-66 / 67 ( 2 ) ความ
R 10-20
s ( 2 ) 25
78-93-3 201-159-0 606-002-00-3 ประมาณ % สัญลักษณ์ความปลอดภัยความเสี่ยงวลีวลีหมายเลข CAS einecs ดัชนีไม่
108-94-1 203-631-1 606-010-00-7 ไม่ ระบบการไหลแบบ L
Seaham Seaham sr7 Grange นิคมอุตสาหกรรม L L L L 0pt Tel : 0191 5213111 www.ipsflowsystems . com
6 มาตรการปล่อยโดยบังเอิญ
ขจัดแหล่งจุดระเบิดทั้งหมด หลีกเลี่ยงการหายใจของไอระเหย สวมชุดป้องกันที่เหมาะสม ทำให้ของเหลวที่ออกมาจากตา .
เปี่ยมด้วยจำนวนมากของน้ำ มีน้ำกับทรายหรือดิน ดูดซับด้วยทรายหรือวัสดุดูดซับที่ไม่ติดไฟและการถ่ายโอนลงในถังเหล็ก
สำหรับการกู้คืนหรือขายทิ้ง ป้องกันน้ำจากการระบายดินหรือน้ำใต้ดิน .
สำคัญเข้าสู่ผิว ถ้าวัสดุระบายแจ้งหน่วยงานท้องถิ่น รวมทั้งบริการไฟ .
7 การจัดการและกระเป๋า
เก็บในที่ร่ม ระหว่าง 5 º C และ 40 º C ในพื้นที่ที่อากาศถ่ายเทได้ดีด้วยวิธีการที่เพียงพอในการควบคุม ทั้งหมดเครื่องมือการจัดการ
electrically กักบริเวณ เก็บให้ห่างจากความร้อน ประกายไฟ เปลวไฟ หรือแหล่งของการจุดระเบิด หลีกเลี่ยง
หายใจเป็นเวลานานของไอ ( อ้างถึงความเสี่ยงการควบคุม ) หลีกเลี่ยงการสัมผัสกับดวงตา ผิวหนัง และเสื้อผ้า . พนักงานรถไฟ
ทั้งหมดการจัดการพิเศษกระบวนการก่อนที่พวกเขาทำงานกับผลิตภัณฑ์นี้ .
8 เปิดแผงควบคุม / ป้องกันส่วนบุคคลที่ทำงาน
เปิดรับลิมิตเตตระไฮโดรฟแรน 50 ppm ( ระยะยาว ) & 100ppm ( ระยะสั้น ) สามารถดูดซึมผ่านผิวหนัง เมทิลเอทิลคีโตน
( กัลยา โสภณพนิช ) แบบด ( ระยะยาว ) & 300ppm ( ระยะสั้น ) ; ทำให้ 10ppm น้ํา ( ระยะยาว ) & 20ppm ( ระยะสั้น ) สามารถดูดซึมผ่านผิวหนัง
.
หมายเหตุ : ยาว = 8 ชั่วโมงระยะเวลา& TWA อ้างอิงระยะสั้น = 15 นาทีช่วงอุปกรณ์ป้องกันระบบทางเดินหายใจ
อ้างอิงหลักฐานการระเบิดทั่วไปทางระบายอากาศ แนะนําการรักษาความเข้มข้นของไอข้างล่างปลอดภัยทำงาน
จำกัดในสถานการณ์ที่ไอความเข้มข้นเกินขอบเขตการทำงานที่ปลอดภัย , อุปกรณ์การหายใจรที่ควร
ถูกสวมใส่ ป้องกันมือ PVA เคลือบไนไตรถุงมือหรืออุปกรณ์ป้องกันดวงตาสาดหลักฐาน
ผิวป้องกันสารเคมี แว่นป้องกัน apron และแหล่งที่มาของน้ำไหลล้างตาหรือผิวหนัง กรณีติดต่อ .
9 คุณสมบัติทางกายภาพและทางเคมีลักษณะ
กลิ่น จุดเดือดFlashpoint
ไอฝ้ายความดันความหนาแน่นความถ่วงจำเพาะ
@ 20 º C
เปอร์เซ็นต์โดยปริมาตรในน้ำระเหย
10 ความเสถียรและความว่องไว
ไฟอันตรายเพราะจุดวาบไฟต่ำและผันผวนสูง ไอระเหยที่หนักกว่าอากาศ และอาจเดินทางไปยังสถานที่เกิดเหตุ
เก็บให้ห่างจากความร้อน ประกายไฟ เปลวไฟ และแหล่งอื่น ๆของการเผาไหม้ .
ไม่ทำปฏิกิริยากับน้ำ
วัสดุเพื่อหลีกเลี่ยงด่าง แอมโมเนีย กรดอนินทรี , คลอรีนสารอนุมูลอิสระที่แข็งแกร่งและไอโซไซยาเนต .
วาบหวิวอันตราย
เมื่อถูกบังคับให้เผา ผลิตภัณฑ์นี้ให้ปิด คาร์บอนไดออกไซด์ คาร์บอนมอนอกไซด์ ไฮโดรเจน คลอไรด์ และควันดำ สีขาว หรือสีเทากลางทึบ
syrupy ของเหลวไม่มีตัวตน 151 F ( 67 º c ) ตามแรก จุดเดือด ส่วนประกอบ เช่น เตตระไฮโดรฟูแรน
6 F t.c.c ตามองค์ประกอบ เช่น เตตระไฮโดรฟูแรน
ก่อนต้มไวไฟสูงไอ / ส่วนผสมอากาศระเบิด
19.065 กิโลปาสคาลที่ 20 ° C - ตามองค์ประกอบ เช่น เตตระไฮโดรฟูแรน
2.49 เดือดก่อน ( อากาศ = 1 )
0.946 ± 0.040 80-90% ส่วนอย่างสมบูรณ์ที่ละลายในน้ำ ยางส่วนแยกออก .
IPS ระบบการไหลของ L Seaham Grange นิคมอุตสาหกรรม l l l sr7 Seaham 0pt Tel : 0191 5213111 ผม www.ipsflowsystems . com
11 พิษวิทยา ข้อมูลเส้นทางหลักของรายการ
การสูดดมและสัมผัสผิว ผลของการสัมผัสแบบเฉียบพลัน
เริ่มรุนแรงมากเกินไปอาจทำให้คลื่นไส้ เวียนหัว และปวดหัว สามารถทำให้เกิดอาการระคายเคืองของตาและจมูก passages
.
ผิวติดต่อ
ผิวระคายเคือง . ติดต่อเหลวอาจลบผิวธรรมชาติน้ำมันส่งผลให้ระคายเคือง ผิวหนังอักเสบอาจเกิดขึ้นกับการติดต่อนานผิว
การดูดซึมของผิวนาน หรือมีแสงอาจส่งผลรุนแรงกับการบาดเจ็บที่ตาอักเสบ ในการติดต่อกับ
ของเหลว ไออึดอัดเล็กน้อย .
กินพิษปานกลาง อาจทำให้เกิดอาการคลื่นไส้ อาเจียน และท้องร่วงได้ อาจทำให้จิตเกิดอาการเรื้อรัง
.
ของการระคายเคืองระบบทางเดินหายใจและความเสียหายให้กับเยื่อบุทางเดินหายใจถูกรายงานในหนูที่สัมผัสกับ 5000 ppm
เตตระไฮโดรฟูแรน เป็นเวลา 90 วัน และควรแนะนำรบกวนการทำงานของตับ ประสานเสียงถูกรายงานถึง 200 ppm .
12
ข้อมูลทางนิเวศวิทยา ไม่มีส่วนประกอบของการเตรียมการจัดเป็นอันตรายต่อสิ่งแวดล้อม อย่างไรก็ตามการดูแลควรจะ
ถ่ายวัสดุเพื่อป้องกันการระบายพื้นผิว .
13 การพิจารณา
ขายผ่านหน่วยงานท้องถิ่น ถ้าเครื่องที่เหมาะสมจะสามารถโอนไปยังบริษัทจำหน่ายเคมี
14 ข้อมูลการขนส่งที่เหมาะสมการจัดส่งกาว
ชื่ออุน number1133
ปฏิบัติการฉุกเฉินรหัส 3ye
15 ข้อมูล สัญลักษณ์
หรือวลีความเสี่ยง :
:
F , Xi
Diamond
r19
/
r67 R20 ของ S2 S9
s16 S25 s29 s33
อาจก่อให้เกิด peroxides ไวไฟระเบิด
เป็นอันตรายโดยการสูดดมระคายเคืองต่อระบบทางเดินหายใจและระบบ
ตาซ้ำ แสงอาจจะทำให้ผิวแห้งหรือแตกอาจทำให้เกิดอาการง่วงนอน หรือเวียนศีรษะไอ
เก็บให้พ้นมือเด็ก ( บังคับงบถ้าขายให้กับประชาชนทั่วไป )
เก็บภาชนะในที่อากาศถ่ายเทได้ดี เก็บห่างจากแหล่งสถานที่
จุด - ไม่สูบบุหรี่ หลีกเลี่ยงการสัมผัสกับดวงตา
ไม่ไหลลงสู่ท่อระบายน้ำ
ใช้มาตรการต่อต้านไฟฟ้าสถิตไหล
ห้องบ่งอันตรายไม่
3
0
พกง . กลุ่มที่ 2
พิเศษบัญญัติวลีความปลอดภัย
:
IPS ระบบไหลผม Seaham Grange นิคมอุตสาหกรรม l l l sr7 Seaham 0pt Tel : 0191 5213111 ผม www.ipsflowsystems . com
16 ข้อมูลอื่น ๆ
ไม่มีข้อมูลเพิ่มเติมข้อมูลที่มีอยู่ในแผ่นข้อมูลความปลอดภัยได้จัดตามที่ สารเคมี ( บ่งอันตรายและ
บรรจุภัณฑ์อุปทาน ) ระเบียบ 2545 แก้ไขเพิ่มเติมเพื่อปกป้องสุขภาพและความปลอดภัยของอุตสาหกรรม
และผู้ใช้ในเชิงพาณิชย์ที่ถือว่าสามารถเข้าใจและทำข้อมูล .
กรุณาตรวจสอบให้แน่ใจว่ามันจะถูกส่งผ่านไปยังคนที่เหมาะสม ( s ) ใน บริษัท ที่สามารถทำข้อมูล .
IPS ระบบการไหลของ L Seaham Grange นิคมอุตสาหกรรม l l l sr7 Seaham 0pt Tel : 0191 5213111 L
www.ipsflowsystems . com
การแปล กรุณารอสักครู่..