To the best of ourknowledge, the use of HF-SLME as a miniaturized separation and
preconcentration technique for the speciation of Sb(III) and Sb(V) has
not been reported yet.
Thermospray flame furnace AAS (TS-FF-AAS) is a simple, sensitive
technique which achieved complete sample introduction and increased
the residence time of the sample atoms in the flame [23].
Compared with flame atomic absorption spectrometry (FAAS), the
sensitivity of 17 elements were significantly improved [24]. In the TSFF-
AAS system, liquid sample is introduced into a flame-heated nickel
tube furnace via a quartz capillary, the tip of which is positioned about
1 mm into the introduction hole of the nickel tube. The hot capillary
tip represents a strongly simplified thermospray. The technique of TSFF-
AAS has been applied to determine Zn, Se, Cd, Pb, etc. [25,26].
The aim of the present work was to establish a new method for the
speciation analysis of Sb(III) and Sb(V) in environmental and
biological samples by HF-SLME combined with TS-FF-AAS. In this
work, 1-octanol was immobilized in the pores of hollow fiber as liquid
membrane, as well as the acceptor solution. Two phase extraction
mode was adopted. Some parameters that influenced HF-SLME and
determination were studied in detail. The proposed method was
applied to the speciation of antimony in environmental and biological
samples with satisfactory results.
To the best of ourknowledge, the use of HF-SLME as a miniaturized separation andpreconcentration technique for the speciation of Sb(III) and Sb(V) hasnot been reported yet.Thermospray flame furnace AAS (TS-FF-AAS) is a simple, sensitivetechnique which achieved complete sample introduction and increasedthe residence time of the sample atoms in the flame [23].Compared with flame atomic absorption spectrometry (FAAS), thesensitivity of 17 elements were significantly improved [24]. In the TSFF-AAS system, liquid sample is introduced into a flame-heated nickeltube furnace via a quartz capillary, the tip of which is positioned about1 mm into the introduction hole of the nickel tube. The hot capillarytip represents a strongly simplified thermospray. The technique of TSFF-AAS has been applied to determine Zn, Se, Cd, Pb, etc. [25,26].The aim of the present work was to establish a new method for thespeciation analysis of Sb(III) and Sb(V) in environmental andbiological samples by HF-SLME combined with TS-FF-AAS. In thiswork, 1-octanol was immobilized in the pores of hollow fiber as liquidmembrane, as well as the acceptor solution. Two phase extractionmode was adopted. Some parameters that influenced HF-SLME anddetermination were studied in detail. The proposed method wasapplied to the speciation of antimony in environmental and biologicalsamples with satisfactory results.
การแปล กรุณารอสักครู่..

To the best of ourknowledge, the use of HF-SLME as a miniaturized separation and
preconcentration technique for the speciation of Sb(III) and Sb(V) has
not been reported yet.
Thermospray flame furnace AAS (TS-FF-AAS) is a simple, sensitive
technique which achieved complete sample introduction and increased
the residence time of the sample atoms in the flame [23].
Compared with flame atomic absorption spectrometry (FAAS), the
sensitivity of 17 elements were significantly improved [24]. In the TSFF-
AAS system, liquid sample is introduced into a flame-heated nickel
tube furnace via a quartz capillary, the tip of which is positioned about
1 mm into the introduction hole of the nickel tube. The hot capillary
tip represents a strongly simplified thermospray. The technique of TSFF-
AAS has been applied to determine Zn, Se, Cd, Pb, etc. [25,26].
The aim of the present work was to establish a new method for the
speciation analysis of Sb(III) and Sb(V) in environmental and
biological samples by HF-SLME combined with TS-FF-AAS. In this
work, 1-octanol was immobilized in the pores of hollow fiber as liquid
membrane, as well as the acceptor solution. Two phase extraction
mode was adopted. Some parameters that influenced HF-SLME and
determination were studied in detail. The proposed method was
applied to the speciation of antimony in environmental and biological
samples with satisfactory results.
การแปล กรุณารอสักครู่..

เพื่อที่ดีที่สุดของ ourknowledge , การใช้ hf-slme เป็นขนาดเล็กของการแยกและเพิ่มความเข้มข้นสำหรับ
เทคนิคชนิดของ SB ( III ) และ SB ( V )
ไม่ได้รายงานเลย thermospray เปลวไฟเตา AAS ( ts-ff-aas ) เป็นเทคนิคที่ง่าย อ่อนไหว
ได้แนะนำตัวอย่างที่สมบูรณ์และเพิ่ม
ระยะเวลาตัวอย่างของอะตอมในเปลวไฟ [ 23 ] .
เมื่อเทียบกับ Flame Atomic absorption spectrometry ( FAAS )
17 องค์ประกอบ มีความไวเพิ่มขึ้น [ 24 ] ใน tsff -
6 ระบบตัวอย่างของเหลวเข้าไปในเปลวไฟร้อนนิกเกิลท่อเตาผ่านควอตซ์
ฝอย ปลายซึ่งตั้งอยู่ประมาณ
1 มม. เป็นเบื้องต้น หลุมของนิกเกิลท่อ ปลายฝอย
ร้อนเป็นอย่างง่าย thermospray .เทคนิคของ tsff -
AAS ได้ถูกนำมาใช้เพื่อตรวจสอบธาตุสังกะสี , เซ , CD , ตะกั่ว ฯลฯ [ 25,26 ] .
วัตถุประสงค์ของงานวิจัยคือการสร้างวิธีการใหม่สำหรับการวิเคราะห์
สปีชีย์ SB ( III ) และ SB ( V ) ในสิ่งแวดล้อมและ
hf-slme รวมกับ ts-ff-aas ตัวอย่างทางชีวภาพ . ในงานนี้
, เส้นถูกตรึงในรูของเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวงเป็น
รวมทั้งพระนาสิกโซลูชั่นสองขั้นตอนการสกัด
โหมดเป็นลูกบุญธรรม มีพารามิเตอร์ที่มีผลต่อการหา hf-slme และ
ศึกษาในรายละเอียด วิธีที่เสนอคือ
ใช้กับชนิดของพลวงในสิ่งแวดล้อมและชีวภาพ
ตัวอย่างที่มีผลที่น่าพอใจ
การแปล กรุณารอสักครู่..
