Pronto 482/486 6-3
Inserting a label strip into the printhead
1 Turn lever (9) counterclockwise to lift the printhead.
2
Push guide ring on axis (6) all the way out.
3
Guide label strip to the print unit above the internal rewinder (5).
4
Guide label strips below the axis (6) and through the label sensor (7) in
such a way that it exits the print unit between the printhead and the print
roller.
5
Push guide ring on axis (6) against
the outer edge of the label strip.
Setting the label sensor
The label sensor (2) can be shifted pe
rpendicular to the direction of paper
flow for adaptation to the label medium
. The sensor unit (1) of the label
sensor is visible from the front throug
h the print unit and is marked with a
indentation in the label sensor retainer