Results and discussion
Effect of plate inclination
We manufactured a small device for use in the basic investigation
of the system. The dimensions of the substrate glass platewere
100 100 3 mm. After 0.3-mm-diameter copper wires were
arranged on the plate, a thin glass plate, 0.1 mm in thickness, was
adhered using transparent adhesive to make the surface smooth
and to prevent insulation breakdown. Cross-sectional drawing of
the device is shown in Fig. 3.
The device was inclined, and sand was uniformly scattered on
the cover glass. A single-phase rectangular voltage was then
applied to the parallel electrodes. The experimentwas conducted in
an air-conditioned laboratory (20e25 C, 40e60 RH). As shown in
Fig. 4, the sand particles on the glass plate were repelled and
transported downward, as confirmed by direct observation of
particle motions using a high-speed microscope camera (Fastcammax
120 K model 1, Photoron, Tokyo) [21,33,35] and numerical
ผลและการอภิปรายผลของแผ่นเอียง
เราผลิตอุปกรณ์ขนาดเล็กสำหรับใช้ในการสอบสวน
พื้นฐานของระบบ ขนาดของ platewere แผ่นแก้ว
100 100 3 มิลลิเมตร หลังจาก 0.3-mm-diameter ทองแดงสายไฟ
จัดเรียงบนจาน จานแก้ว บาง , 0.1 มม. ความหนา คือ ปฏิบัติตาม ใช้กาวใส
เพื่อให้พื้นผิวเรียบและเพื่อป้องกันการฉนวนกันความร้อน ข้ามวาดภาพตัดของ
อุปกรณ์จะแสดงในรูปที่ 3 .
อุปกรณ์เอียงและทรายถูกขึ้นกระจัดกระจายบน
แก้วครอบ เฟสสี่เหลี่ยมแรงดันแล้ว
ใช้ขั้วไฟฟ้าแบบขนาน การวิจัยนี้ดำเนินการใน
ห้องปฏิบัติการปรับอากาศ ( 20e25 C 40e60 Rh ) ดังแสดงในรูปที่ 4
,อนุภาคทรายบนจานแก้วถูกขนลงและ
, ยืนยันโดยการสังเกตโดยตรงของ
ภาพเคลื่อนไหวอนุภาคโดยใช้กล้อง Microscope ความเร็วสูง ( fastcammax
120 K รุ่น 1 , photoron โตเกียว ) [ 21,33,35 ] และเชิงตัวเลข
การแปล กรุณารอสักครู่..
