Oyster shell waste (5 kg) was obtained from the commercial
oyster farm in Akitsu-cho, Higashi-Hiroshima city, western Japan.
All reagents were of reagent grade and used as received. Soybean
oil, hydrochloric acid, anhydrous sodium sulfate, hexane and acetone
were purchased from Sigma–Aldrich Japan KK (Tokyo, Japan).
Methanol (>99.8%) was purchased from Riedel-de Haën (Seelze,
Germany). Calcium oxide (CaO) and acetic acid were purchased
from Katayama Chemical Industries (Osaka, Japan).
2.2. Preparation and characterization of combusted oyster shell
To remove sands and seaweeds deposited on the shell surface,
the oyster shells were washed with tap water and dried naturally.
The shells were roughly crushed using a hammer and grounded
using a pestle and mortar to a powder to pass through a 0.8 mm
sieve. The powdered shell was then dried at 110 C for 2 h and
stored in a desiccator.
The weight-loss of the powdered shell was measured after combustion
with air in an electric furnace at a given temperature (100,
500, 700, 800, 900 and 1000 C) for 3 h and then the combusted
shell was stored in a desiccator. X-ray powder diffraction (XRD)
patterns for each combusted oyster shell and calcium oxide were
analyzed (Rotaflex RU-200, RIGAKU). Data were collected over a
2h range of 10–90, with a step size of 0.1 at a scanning speed
of 3 min1
.
2.3.
Oyster shell waste (5 kg) was obtained from the commercialoyster farm in Akitsu-cho, Higashi-Hiroshima city, western Japan.All reagents were of reagent grade and used as received. Soybeanoil, hydrochloric acid, anhydrous sodium sulfate, hexane and acetonewere purchased from Sigma–Aldrich Japan KK (Tokyo, Japan).Methanol (>99.8%) was purchased from Riedel-de Haën (Seelze,Germany). Calcium oxide (CaO) and acetic acid were purchasedfrom Katayama Chemical Industries (Osaka, Japan).2.2. Preparation and characterization of combusted oyster shellTo remove sands and seaweeds deposited on the shell surface,the oyster shells were washed with tap water and dried naturally.The shells were roughly crushed using a hammer and groundedusing a pestle and mortar to a powder to pass through a 0.8 mmsieve. The powdered shell was then dried at 110 C for 2 h andstored in a desiccator.The weight-loss of the powdered shell was measured after combustionwith air in an electric furnace at a given temperature (100,500, 700, 800, 900 and 1000 C) for 3 h and then the combustedshell was stored in a desiccator. X-ray powder diffraction (XRD)patterns for each combusted oyster shell and calcium oxide wereanalyzed (Rotaflex RU-200, RIGAKU). Data were collected over a2h range of 10–90, with a step size of 0.1 at a scanning speedof 3 min1.2.3.
การแปล กรุณารอสักครู่..

หอยนางรมเสียเปลือก (5 กก.) ที่ได้รับจากการค้า
ฟาร์มหอยนางรมใน Akitsu-cho, เมืองฮิกาชิฮิโรชิมา-ตะวันตกญี่ปุ่น.
สารเคมีทั้งหมดเป็นของเกรดน้ำยาและใช้เป็นที่ได้รับ ถั่วเหลือง
น้ำมันกรดไฮโดรคลอริกโซเดียมซัลเฟตปราศจากเฮกเซนและอะซีโตน
ที่ซื้อมาจาก Sigma-Aldrich KK ญี่ปุ่น (โตเกียวประเทศญี่ปุ่น).
เมทานอล (> 99.8%) ซื้อมาจาก Riedel-de Haen (Seelze,
เยอรมนี) แคลเซียมออกไซด์ (CaO) และกรดอะซิติกที่ซื้อมา
จาก Katayama เคมีอุตสาหกรรม (โอซาก้าประเทศญี่ปุ่น).
2.2 การเตรียมและลักษณะของเปลือกหอยเผา
เพื่อเอาทรายและสาหร่ายวางลงบนพื้นผิวเปลือก,
เปลือกหอยนางรมถูกล้างด้วยน้ำประปาและแห้งตามธรรมชาติ.
เปลือกหอยบดประมาณโดยใช้ค้อนและมีเหตุผล
โดยใช้สากและปูนผงที่จะผ่าน ผ่าน 0.8 มม
ตะแกรง เปลือกผงแห้งแล้วที่ 110 องศาเซลเซียสเป็นเวลา 2 ชั่วโมงและ
เก็บไว้ในเดซิ.
การสูญเสียน้ำหนักของเปลือกผงวัดหลังจากการเผาไหม้
กับอากาศเตาไฟฟ้าที่อุณหภูมิที่กำหนด (100,
500, 700, 800, 900 1000 C) เป็นเวลา 3 ชั่วโมงและจากนั้นเผา
เปลือกถูกเก็บไว้ในเดซิ ผง X-ray การเลี้ยวเบน (XRD)
รูปแบบสำหรับแต่ละเปลือกหอยนางรมเผาและแคลเซียมออกไซด์ถูก
วิเคราะห์ (Rotaflex RU-200 Rigaku) เก็บรวบรวมข้อมูลมากกว่า
ช่วง 2h ของ 10-90, ที่มีขนาด 0.1 ขั้นตอนของการที่ความเร็วในการสแกน
3 min1
.
2.3
การแปล กรุณารอสักครู่..

ของเสียจากเปลือกหอยนางรม ( 5 กก. ) ที่ได้จากการค้า
ฟาร์มหอยนางรมใน akitsu โจ ฮิกาชิฮิโระชิมะเมืองตะวันตก , ญี่ปุ่น .
ทั้งหมดเป็นเกรดที่ใช้สารเคมี และใช้เป็น ที่ได้รับ ถั่วเหลือง
น้ํามัน , กรดเกลือ , แอนไฮดรัสโซเดียมซัลเฟต , เฮกเซนและอะซิโตน
ซื้อมาจาก Sigma –ดิชญี่ปุ่น KK ( โตเกียว , ญี่ปุ่น ) .
เมทานอล ( 99.8% ) ซื้อมาจาก รีเดล เดอ ฮา ( ซีเ ลเซ่
. N , เยอรมนี )แคลเซียมออกไซด์ ( CaO ) และ กรดซื้อ
จากอุตสาหกรรมเคมี คาตายามา ( โอซาก้า ) .
2.2 . การเตรียมและการเผาเพื่อเอาทรายและเปลือกหอยนางรม
สาหร่ายฝากบนพื้นผิวเปลือก
เปลือกหอยนางรมที่ถูกล้างด้วยน้ำและแห้งตามธรรมชาติ หอยได้ประมาณแหลก
ใช้ค้อนและสายดินใช้สากและครกผงผ่านตะแกรงที่ 0.8 มม
เปลือกผงแห้งที่อุณหภูมิ 110 องศาเซลเซียสเป็นเวลา 2 ชั่วโมงและเก็บไว้ในเดซิกเคเตอร์
.
น้ำหนักของเปลือกผงวัดหลังจากการเผาไหม้
กับอากาศในเตาอบไฟฟ้าที่ให้อุณหภูมิ ( 100
500 , 700 , 800 , 900 และ 1000 องศาเซลเซียส เป็นเวลา 3 ชม. แล้วเผา
เปลือกที่ถูกเก็บไว้ในเดซิกเคเตอร์ .การเลี้ยวเบนรังสีเอกซ์ ( XRD ) ผง
รูปแบบสำหรับแต่ละเผาเปลือกหอยนางรมและแคลเซียมออกไซด์ (
( ru-200 rotaflex , วิเคราะห์ rigaku ) เก็บรวบรวมข้อมูลผ่าน
2H ช่วง 10 - 90 ด้วยขั้นตอนขนาด 0.1 ที่ความเร็วในการสแกน min1
3
.
2.3
การแปล กรุณารอสักครู่..
