6. ConclusionsLeaching from CBA treated wood was investigated with the การแปล - 6. ConclusionsLeaching from CBA treated wood was investigated with the ไทย วิธีการพูด

6. ConclusionsLeaching from CBA tre

6. Conclusions
Leaching from CBA treated wood was investigated with the aim to identify chemical mechanisms of fixation and mobilisation of biocides based on a pH dependency leaching test (ANC test) that has been already widely applied for waste and concrete construction materials. Despite the fact that it is an aggressive test (test conditions are unlikely to occur under service conditions), ANC results, in combination with a suitable set of analytical methods, provide manifold information about the studied system and chemical reactions that occur in this system, information which is indispensable for the interpretation of leaching processes. However, in the case of CBA treated wood it proved to be difficult to describe the entire composition of the eluates without INVESTING great effort for molecule identification and set up of methods for quantification.

The main conclusions from this study can be summarised as follows:

-
Inorganic endogenous elements like Ca and K, and ions like sulphate and phosphate are released from untreated and treated wood in contact with water at different pH. They are linked to the solid phase (e.g. Ca in treated wood) or solubilised in wood pore water (e.g. K) and are the main electrolytes that regulate the ionic strength.
-
Organic compounds are released from natural wood. The quantity of released TOC as well as substances with carboxyl and phenolic groups increases with pH. This observation is mainly explained by hydrolysis reactions on wood polymers.
-
The chemical composition of wood changes during storage, at least for sapwood from P. sylvestris. This affects not only binding and release of substances in the ANC test, but also the amount and composition of extractives, including the availability of binding sites in the solid as well as the liquid phase.
-
Wood is modified by the treatment with preservatives. In the case of products containing Cu and amines, this does not only involve binding reactions of Cu–amine complexes, but also modifications of wood components due to reactions with amines. A number of compounds containing nitrogen are released from wood treated with a CBA solution, probably due to an excess of amines and reactions of amines with wood components. It can be expected that these reactions depend on the identity of the amines, the ratio between Cu and amines and the pH conditions in the preservative solution and in wood.
-
Cu release is relatively high with respect to its initial content. Cu is bound on carboxyl and phenolic sites and forms soluble complexes with extractives. The balance between binding to solid and extractable components, as well as the acid/base properties of the binding sites, result in the lower release at neutral pH.
-
B is released at a high level. Even if some fixation phenomena are possible, their effectiveness is weak (demonstrated by the non-dependency on pH) and cannot effectively hinder the leaching.
-
Tebuconazole is released in lesser extent if compared to its initial content in wood samples. Its fixation on solid wood structure seems to be influenced by pH, suggesting hydrogen bond interactions with OH groups on wood.
0/5000
จาก: -
เป็น: -
ผลลัพธ์ (ไทย) 1: [สำเนา]
คัดลอก!
6. ConclusionsLeaching from CBA treated wood was investigated with the aim to identify chemical mechanisms of fixation and mobilisation of biocides based on a pH dependency leaching test (ANC test) that has been already widely applied for waste and concrete construction materials. Despite the fact that it is an aggressive test (test conditions are unlikely to occur under service conditions), ANC results, in combination with a suitable set of analytical methods, provide manifold information about the studied system and chemical reactions that occur in this system, information which is indispensable for the interpretation of leaching processes. However, in the case of CBA treated wood it proved to be difficult to describe the entire composition of the eluates without INVESTING great effort for molecule identification and set up of methods for quantification.The main conclusions from this study can be summarised as follows:-Inorganic endogenous elements like Ca and K, and ions like sulphate and phosphate are released from untreated and treated wood in contact with water at different pH. They are linked to the solid phase (e.g. Ca in treated wood) or solubilised in wood pore water (e.g. K) and are the main electrolytes that regulate the ionic strength.-Organic compounds are released from natural wood. The quantity of released TOC as well as substances with carboxyl and phenolic groups increases with pH. This observation is mainly explained by hydrolysis reactions on wood polymers.-
The chemical composition of wood changes during storage, at least for sapwood from P. sylvestris. This affects not only binding and release of substances in the ANC test, but also the amount and composition of extractives, including the availability of binding sites in the solid as well as the liquid phase.
-
Wood is modified by the treatment with preservatives. In the case of products containing Cu and amines, this does not only involve binding reactions of Cu–amine complexes, but also modifications of wood components due to reactions with amines. A number of compounds containing nitrogen are released from wood treated with a CBA solution, probably due to an excess of amines and reactions of amines with wood components. It can be expected that these reactions depend on the identity of the amines, the ratio between Cu and amines and the pH conditions in the preservative solution and in wood.
-
Cu release is relatively high with respect to its initial content. Cu is bound on carboxyl and phenolic sites and forms soluble complexes with extractives. The balance between binding to solid and extractable components, as well as the acid/base properties of the binding sites, result in the lower release at neutral pH.
-
B is released at a high level. Even if some fixation phenomena are possible, their effectiveness is weak (demonstrated by the non-dependency on pH) and cannot effectively hinder the leaching.
-
Tebuconazole is released in lesser extent if compared to its initial content in wood samples. Its fixation on solid wood structure seems to be influenced by pH, suggesting hydrogen bond interactions with OH groups on wood.
การแปล กรุณารอสักครู่..
ผลลัพธ์ (ไทย) 2:[สำเนา]
คัดลอก!
6. Conclusions
Leaching from CBA treated wood was investigated with the aim to identify chemical mechanisms of fixation and mobilisation of biocides based on a pH dependency leaching test (ANC test) that has been already widely applied for waste and concrete construction materials. Despite the fact that it is an aggressive test (test conditions are unlikely to occur under service conditions), ANC results, in combination with a suitable set of analytical methods, provide manifold information about the studied system and chemical reactions that occur in this system, information which is indispensable for the interpretation of leaching processes. However, in the case of CBA treated wood it proved to be difficult to describe the entire composition of the eluates without INVESTING great effort for molecule identification and set up of methods for quantification.

The main conclusions from this study can be summarised as follows:

-
Inorganic endogenous elements like Ca and K, and ions like sulphate and phosphate are released from untreated and treated wood in contact with water at different pH. They are linked to the solid phase (e.g. Ca in treated wood) or solubilised in wood pore water (e.g. K) and are the main electrolytes that regulate the ionic strength.
-
Organic compounds are released from natural wood. The quantity of released TOC as well as substances with carboxyl and phenolic groups increases with pH. This observation is mainly explained by hydrolysis reactions on wood polymers.
-
The chemical composition of wood changes during storage, at least for sapwood from P. sylvestris. This affects not only binding and release of substances in the ANC test, but also the amount and composition of extractives, including the availability of binding sites in the solid as well as the liquid phase.
-
Wood is modified by the treatment with preservatives. In the case of products containing Cu and amines, this does not only involve binding reactions of Cu–amine complexes, but also modifications of wood components due to reactions with amines. A number of compounds containing nitrogen are released from wood treated with a CBA solution, probably due to an excess of amines and reactions of amines with wood components. It can be expected that these reactions depend on the identity of the amines, the ratio between Cu and amines and the pH conditions in the preservative solution and in wood.
-
Cu release is relatively high with respect to its initial content. Cu is bound on carboxyl and phenolic sites and forms soluble complexes with extractives. The balance between binding to solid and extractable components, as well as the acid/base properties of the binding sites, result in the lower release at neutral pH.
-
B is released at a high level. Even if some fixation phenomena are possible, their effectiveness is weak (demonstrated by the non-dependency on pH) and cannot effectively hinder the leaching.
-
Tebuconazole is released in lesser extent if compared to its initial content in wood samples. Its fixation on solid wood structure seems to be influenced by pH, suggesting hydrogen bond interactions with OH groups on wood.
การแปล กรุณารอสักครู่..
ผลลัพธ์ (ไทย) 3:[สำเนา]
คัดลอก!
6 . สรุป
ละลายจาก CBA ไม้ได้รับการรักษาสิ่งแวดล้อม ด้วยจุดมุ่งหมายที่จะระบุกลไกทางเคมีของวิธีการและของ biocides ขึ้นอยู่กับ pH ของการพึ่งพาการทดสอบทารกที่ได้รับแล้วใช้กันอย่างแพร่หลายของเสียและคอนกรีตวัสดุก่อสร้าง แม้จะมีข้อเท็จจริงที่ว่ามันเป็นแบบทดสอบที่ก้าวร้าว ( เงื่อนไขการทดสอบไม่น่าจะเกิดขึ้นภายใต้เงื่อนไขการให้บริการ )ผล ANC ในการรวมกันกับการตั้งค่าที่เหมาะสมของวิธีการวิเคราะห์ ให้ข้อมูลต่างๆ เกี่ยวกับการศึกษาและระบบปฏิกิริยาทางเคมีที่เกิดขึ้นในระบบนี้ ข้อมูลที่จำเป็นสำหรับการตีความของกระบวนการ อย่างไรก็ตามในกรณีของ CBA ถือว่าไม้มันพิสูจน์ยากที่จะอธิบายองค์ประกอบทั้งหมดของ eluates โดยไม่มีการลงทุนความพยายามที่ดีสำหรับการระบุโมเลกุลและการตั้งค่าวิธีการปริมาณ

สรุปหลักจากการศึกษานี้สามารถสรุปได้ดังนี้

-
นินทรีย์ในองค์ประกอบเช่น Ca และ K ,และไอออนเช่นซัลเฟตและฟอสเฟตออกจากไม้ดิบและรักษาในการติดต่อกับน้ำที่แตกต่างกันเมื่อพวกเขามีการเชื่อมโยงไปยังเฟสของแข็ง ( เช่น CA ในการรักษาไม้ ) หรือ solubilised ในรูขุมขนน้ำไม้ ( เช่น K ) และเป็นหลักเป็นที่ควบคุมความแรงไอออน .
-
สารอินทรีย์ออกจากธรรมชาติ ไม้ปริมาณของการปล่อยลง รวมทั้งสารที่มีหมู่คาร์บอกซิลและกลุ่มฟีนอลเพิ่มขึ้น เมื่อสังเกตนี้สามารถอธิบายได้โดยส่วนใหญ่ในการปฏิกิริยาพอลิเมอร์ไม้ . . . .
-
องค์ประกอบทางเคมีของไม้ การเปลี่ยนแปลงระหว่างการเก็บรักษาได้ อย่างน้อยก็กระพี้จากหน้า sylvestris . งานนี้ไม่เพียง แต่การปล่อยสารใน ANC ทดสอบแต่ด้วยปริมาณและองค์ประกอบของ extractives รวมถึงความพร้อมของผูกพันเว็บไซต์ในที่เป็นของแข็งเช่นเดียวกับเฟสของเหลว .
-
ไม้ที่ดัดแปลงโดยการรักษาด้วยสารกันบูด ในกรณีของผลิตภัณฑ์ที่มีส่วนผสมของทองแดงและเอมีน นี้ไม่เพียง แต่เกี่ยวข้องกับปฏิกิริยาของสารประกอบเชิงซ้อนทองแดงผูกและเอมีน แต่ยังมีการปรับเปลี่ยนองค์ประกอบของไม้ เนื่องจากปฏิกิริยากับเอมีนหมายเลขของสารประกอบที่มีไนโตรเจนออกจากไม้ได้รับการรักษา ด้วยโซลูชั่น CBA อาจเนื่องจากการเกินของเอมีนและปฏิกิริยาของเอมีนที่มีส่วนประกอบของไม้ ก็สามารถคาดหวังว่าปฏิกิริยาเหล่านี้ขึ้นอยู่กับตัวตนของเอมีน อัตราส่วนผสมระหว่างทองแดงและเอมีนและพีเอชในการแก้ปัญหากัน
-
และไม้ทองแดง เป็นรุ่นที่ค่อนข้างสูง ส่วนปริมาณเริ่มต้นของ ทองแดงที่ถูกผูกไว้กับหลายเว็บไซต์และรูปแบบซับซ้อนและละลายกับ extractives ฟีนอล . ความสมดุลระหว่างผูกที่มั่นคงและปริมาณส่วนประกอบ รวมทั้งกรด / ด่าง คุณสมบัติของเว็บไซต์รวมผลในรุ่นล่างที่เป็นกลาง PH
-
B จะถูกปล่อยออกในระดับสูงแม้ว่าบางปรากฏการณ์การตรึงที่เป็นไปได้ , ประสิทธิภาพของพวกเขาอ่อนแอ ( แสดงโดย ไม่พึ่งพา pH ) และไม่สามารถมีประสิทธิภาพขัดขวางการละลาย .
-
ทีบูโคนาโซลออกมาในขอบเขตที่น้อยกว่าถ้าเทียบกับเนื้อหาเริ่มต้นในตัวอย่างไม้ การตรึงบนโครงสร้างไม้เนื้อแข็งที่ดูเหมือนว่าจะได้รับอิทธิพลจากอ าพันธะไฮโดรเจนปฏิสัมพันธ์กับโอ้กลุ่มไม้ .
การแปล กรุณารอสักครู่..
 
ภาษาอื่น ๆ
การสนับสนุนเครื่องมือแปลภาษา: กรีก, กันนาดา, กาลิเชียน, คลิงออน, คอร์สิกา, คาซัค, คาตาลัน, คินยารวันดา, คีร์กิซ, คุชราต, จอร์เจีย, จีน, จีนดั้งเดิม, ชวา, ชิเชวา, ซามัว, ซีบัวโน, ซุนดา, ซูลู, ญี่ปุ่น, ดัตช์, ตรวจหาภาษา, ตุรกี, ทมิฬ, ทาจิก, ทาทาร์, นอร์เวย์, บอสเนีย, บัลแกเรีย, บาสก์, ปัญจาป, ฝรั่งเศส, พาชตู, ฟริเชียน, ฟินแลนด์, ฟิลิปปินส์, ภาษาอินโดนีเซี, มองโกเลีย, มัลทีส, มาซีโดเนีย, มาราฐี, มาลากาซี, มาลายาลัม, มาเลย์, ม้ง, ยิดดิช, ยูเครน, รัสเซีย, ละติน, ลักเซมเบิร์ก, ลัตเวีย, ลาว, ลิทัวเนีย, สวาฮิลี, สวีเดน, สิงหล, สินธี, สเปน, สโลวัก, สโลวีเนีย, อังกฤษ, อัมฮาริก, อาร์เซอร์ไบจัน, อาร์เมเนีย, อาหรับ, อิกโบ, อิตาลี, อุยกูร์, อุสเบกิสถาน, อูรดู, ฮังการี, ฮัวซา, ฮาวาย, ฮินดี, ฮีบรู, เกลิกสกอต, เกาหลี, เขมร, เคิร์ด, เช็ก, เซอร์เบียน, เซโซโท, เดนมาร์ก, เตลูกู, เติร์กเมน, เนปาล, เบงกอล, เบลารุส, เปอร์เซีย, เมารี, เมียนมา (พม่า), เยอรมัน, เวลส์, เวียดนาม, เอสเปอแรนโต, เอสโทเนีย, เฮติครีโอล, แอฟริกา, แอลเบเนีย, โคซา, โครเอเชีย, โชนา, โซมาลี, โปรตุเกส, โปแลนด์, โยรูบา, โรมาเนีย, โอเดีย (โอริยา), ไทย, ไอซ์แลนด์, ไอร์แลนด์, การแปลภาษา.

Copyright ©2025 I Love Translation. All reserved.

E-mail: