KORG
KROSS Music Workstation
How to Load Bonus Sound Libraries
Step 1 – Preparing the Media for Transfer to the KROSS
*Use an SD Card or SDHC Card to transfer the Program data from your PC to the KROSS.
You will need a minimum of 12MB of free memory space, AFTER formatting.
Procedure to format an SD card:
1. Insert the SD card into the card slot on the KROSS
2. In Media Mode, access the MEDIA > UTILITY page
3. Press the FUNCTION button, to select “Format”
4. Press the OK (MENU) button to execute the formatting procedure
For additional details on this procedure, please refer to the “Formatting an SD card” section in
the quick start guide.
Step2 – Copying the Program Data to an SD Card
1. Unzip the bonus data, entitled “KROSS_BONUS.zip” archive, which you downloaded on
your PC
2. After you unzip the archive, the folder “KROSS_BONUS” will be created
3. Open this folder; there will be the following 4 “PCG” files
BONUS1.PCG this file is for “Expanded Keyboards (Piano, E.Piano, Organ, Drums)”
BONUS2.PCG this file is for “Expanded Instruments (Bell, Strings, Brass, Guitar)”
BONUS3.PCG this file is for “Expanded Synth (Synth Lead, Synth Pad, Bass)”
BONUS4.PCG this file is for “BEST OF TRITON”
4. Copy the 4 PCG files listed above into the following DATA (Folder) directory on your SD
Card
KORG (Folder)
- KROSS (Folder)
- DATA (Folder)
- BONUS1. PCG
- BONUS2. PCG
- BONUS3. PCG
- BONUS4. PCG
*Note:
If the PCG data listed above isn’t put into the aforementioned data (folder), the KROSS
may not correctly recognize the data. It’s important to make sure that the PCG data is
installed in the correct location.
Step 3 – Locating the Data on the SD Card (The following steps take place on the KROSS)
1. Insert the SD Card mentioned in Step 1 into the card slot on the KROSS, and turn on the
power to the KROSS.
2. Press the GLOBAL/MEDIA button, to enter the “GLOBAL/MEDIA” mode
3. Press the MENU button
4. Access the “MEDIA > FILE” page
5. Press the OK (MENU) button.
6. The “MEDIA>FILE” Page will be shown on the display
As a shortcut, in Step3, you can move directly to the FILE page by holding down the
EXIT”button and pressing the GLOBAL/MEDIA button
Step 4 – Loading the Data
The PCG file names which you copied in Step 2 will be shown on the display.
1. For example, select “BONUS1.PCG.”
2. Press “>” button, to select the programs
3. Press “>” button again
4. Press “v” button, to select “Bank U”
5. Press the FUNCTION button, to select “Load Selected”
6. Press the OK (MENU) button again
7. LOAD PROGRAM BANK U will be shown on the display
8. Press the OK (MENU) button
The data will be loaded.
Using the same process, please load “BONUS2.PCG”, “BONUS3.PCG” and “BONUS4.PCG”.
Checking the Sounds
1. Press the PROGRAM button, to enter “PROGRAM” mode
2. Select “USER” with the CATEGORY Knob
Now you can take full advantage of the Bonus Sound Libraries!
Note
*Only one PCG file can be loaded at a time
*Before you load these PCG files, make sure that you don’t mind losing any of the data that is
currently on your KROSS. Please save any important data onto an SD card in advance.
*In Step 4, if you select “BONUS1. PCG.” and load the PCG data, all preload data including
Program, Combination, DrumKit, Arpeggiator pattern, and Global data will be overwritten.
Similarly, if you select “BONUS1.PCG” and “Program”, then, load the PCG data, all preloaded
programs will be overwritten. So, if you stored your original programs in banks A-D, those
Programs will be replaced. Please be sure that you back-up any important data on your
KROSS before installing this Bonus Sound Library.
KORG
KROSS Music Workstation
How to Load Bonus Sound Libraries
Step 1 – Preparing the Media for Transfer to the KROSS
*Use an SD Card or SDHC Card to transfer the Program data from your PC to the KROSS.
You will need a minimum of 12MB of free memory space, AFTER formatting.
Procedure to format an SD card:
1. Insert the SD card into the card slot on the KROSS
2. In Media Mode, access the MEDIA > UTILITY page
3. Press the FUNCTION button, to select “Format”
4. Press the OK (MENU) button to execute the formatting procedure
For additional details on this procedure, please refer to the “Formatting an SD card” section in
the quick start guide.
Step2 – Copying the Program Data to an SD Card
1. Unzip the bonus data, entitled “KROSS_BONUS.zip” archive, which you downloaded on
your PC
2. After you unzip the archive, the folder “KROSS_BONUS” will be created
3. Open this folder; there will be the following 4 “PCG” files
BONUS1.PCG this file is for “Expanded Keyboards (Piano, E.Piano, Organ, Drums)”
BONUS2.PCG this file is for “Expanded Instruments (Bell, Strings, Brass, Guitar)”
BONUS3.PCG this file is for “Expanded Synth (Synth Lead, Synth Pad, Bass)”
BONUS4.PCG this file is for “BEST OF TRITON”
4. Copy the 4 PCG files listed above into the following DATA (Folder) directory on your SD
Card
KORG (Folder)
- KROSS (Folder)
- DATA (Folder)
- BONUS1. PCG
- BONUS2. PCG
- BONUS3. PCG
- BONUS4. PCG
*Note:
If the PCG data listed above isn’t put into the aforementioned data (folder), the KROSS
may not correctly recognize the data. It’s important to make sure that the PCG data is
installed in the correct location.
Step 3 – Locating the Data on the SD Card (The following steps take place on the KROSS)
1. Insert the SD Card mentioned in Step 1 into the card slot on the KROSS, and turn on the
power to the KROSS.
2. Press the GLOBAL/MEDIA button, to enter the “GLOBAL/MEDIA” mode
3. Press the MENU button
4. Access the “MEDIA > FILE” page
5. Press the OK (MENU) button.
6. The “MEDIA>FILE” Page will be shown on the display
As a shortcut, in Step3, you can move directly to the FILE page by holding down the
EXIT”button and pressing the GLOBAL/MEDIA button
Step 4 – Loading the Data
The PCG file names which you copied in Step 2 will be shown on the display.
1. For example, select “BONUS1.PCG.”
2. Press “>” button, to select the programs
3. Press “>” button again
4. Press “v” button, to select “Bank U”
5. Press the FUNCTION button, to select “Load Selected”
6. Press the OK (MENU) button again
7. LOAD PROGRAM BANK U will be shown on the display
8. Press the OK (MENU) button
The data will be loaded.
Using the same process, please load “BONUS2.PCG”, “BONUS3.PCG” and “BONUS4.PCG”.
Checking the Sounds
1. Press the PROGRAM button, to enter “PROGRAM” mode
2. Select “USER” with the CATEGORY Knob
Now you can take full advantage of the Bonus Sound Libraries!
Note
*Only one PCG file can be loaded at a time
*Before you load these PCG files, make sure that you don’t mind losing any of the data that is
currently on your KROSS. Please save any important data onto an SD card in advance.
*In Step 4, if you select “BONUS1. PCG.” and load the PCG data, all preload data including
Program, Combination, DrumKit, Arpeggiator pattern, and Global data will be overwritten.
Similarly, if you select “BONUS1.PCG” and “Program”, then, load the PCG data, all preloaded
programs will be overwritten. So, if you stored your original programs in banks A-D, those
Programs will be replaced. Please be sure that you back-up any important data on your
KROSS before installing this Bonus Sound Library.
การแปล กรุณารอสักครู่..
korg
Kross เพลงเวิร์กสเตชัน
วิธีโหลดโบนัสเสียงห้องสมุด
ขั้นตอนที่ 1 - เตรียมสื่อสำหรับการถ่ายโอนไปยัง Kross
* ใช้การ์ด SD หรือ SDHC การ์ดเพื่อโอนข้อมูลโปรแกรมจากเครื่องคอมพิวเตอร์ของคุณไปยัง Kross .
คุณจะต้องอย่างน้อย 12MB พื้นที่หน่วยความจำฟรีหลังจากการจัดรูปแบบ .
กระบวนการรูปแบบการ์ด SD :
1 เสียบการ์ด SD เข้าไปในช่องเสียบการ์ดบน Kross
2 ในโหมด Mediaการเข้าถึงสื่อ > หน้ายูทิลิตี้
3 กด ปุ่ม เพื่อเลือก " รูปแบบ "
4 กดตกลง ( ปุ่มเมนู ) การจัดรูปแบบกระบวนการ
สำหรับรายละเอียดเพิ่มเติมเกี่ยวกับขั้นตอนนี้ โปรดดูที่ " การจัดรูปแบบ SD การ์ด " ส่วนใน
Step 2 –คู่มือการเริ่มต้น คัดลอกข้อมูลโปรแกรมการ์ด SD
1 unzip ข้อมูลโบนัส เรื่อง " kross_bonus . zip " เก็บที่คุณดาวน์โหลดบนคอมพิวเตอร์ของคุณ
2 หลังจากที่คุณเปิดเครื่องรูดเก็บโฟลเดอร์ " kross_bonus " จะถูกสร้างขึ้น
3 เปิดโฟลเดอร์นี้จะมีต่อไปนี้ 4 " pcg " ไฟล์
bonus1.pcg ไฟล์นี้ ก็คือ " คีย์บอร์ดขยาย ( เช่นเปียโน , ออร์แกน , เปียโน , กลอง ) "
bonus2.pcg ไฟล์นี้เป็น " เครื่องมือขยาย ( ระฆัง , สตริง , ทองเหลือง , กีตาร์ ) "
bonus3 .pcg ไฟล์นี้เป็น " Synth ขยาย ( Synth ตะกั่วแผ่น , Synth เบส ) "
bonus4.pcg ไฟล์นี้เป็น " ที่ดีที่สุดของ Triton "
4 คัดลอกไฟล์ pcg 4 ข้างต้นเป็นข้อมูลต่อไปนี้ ( โฟลเดอร์ ) ในไดเรกทอรีบนการ์ด SD ของคุณ
korg ( โฟลเดอร์ )
- Kross ( โฟลเดอร์ )
- ข้อมูล ( โฟลเดอร์ )
- bonus1 . pcg
- bonus2 . pcg
- bonus3 . pcg
- bonus4 . pcg
หมายเหตุ :ถ้า pcg ข้อมูลข้างต้นไม่ได้ใส่ข้อมูลดังกล่าว ( โฟลเดอร์ ) , Kross
อาจไม่ถูกต้องรับรู้ข้อมูล มันเป็นสิ่งสำคัญเพื่อให้แน่ใจว่าข้อมูล pcg เป็น
ติดตั้งในสถานที่ที่ถูกต้อง ขั้นตอนที่ 3 –ค้นหาข้อมูลใน SD Card ( ขั้นตอนต่อไปนี้จะใช้สถานที่ใน Kross )
1 ใส่ SD card ที่กล่าวถึงในขั้นตอนที่ 1 ลงในช่องเสียบการ์ดบน Kross และเปิด
อำนาจกับ Kross .
2 กดปุ่มส่วนกลาง / สื่อ เพื่อเข้าสู่ "
โหมดโลก / สื่อ " 3 กด ปุ่มเมนู
4 การเข้าถึงสื่อไฟล์หน้า "
5 กดตกลง ( ปุ่มเมนู ) .
6 " แฟ้ม " สื่อหน้าจะแสดงบนจอแสดงผล
เป็นทางลัด ในที่ที่คุณสามารถย้ายไปยังหน้าแฟ้มโดยถือลงปุ่ม
ออกจาก " และกดปุ่มสื่อระดับโลก /
4 ขั้นตอนและโหลดข้อมูล
การตั้งชื่อไฟล์ pcg ที่คุณคัดลอกในขั้นตอนที่ 2 จะแสดงบนจอแสดงผล .
1 ตัวอย่างเช่น เลือก " bonus1 . pcg "
2 กดที่ปุ่ม " > " เพื่อเลือกโปรแกรม
3 กดที่ปุ่ม " > " อีกครั้ง
4 กด " 5 " ปุ่มเพื่อเลือกธนาคาร " U "
5 กด ปุ่ม เพื่อเลือกโหลดเลือก "
6 กดตกลง ( ปุ่มเมนู ) อีกครั้ง
7 ธนาคารโปรแกรม โหลด คุณจะแสดงบนจอแสดงผล
8กดตกลง ( ปุ่มเมนู )
ข้อมูลจะถูกโหลด ด้วยกระบวนการเดียวกัน กรุณาโหลด " bonus2 . pcg " , " bonus3 . pcg " และ " bonus4 . pcg " เช็คเสียง
1 กดปุ่มโปรแกรม การป้อนโปรแกรม " โหมด "
2 เลือก " ผู้ใช้ " กับประเภทลูกบิด
ตอนนี้คุณสามารถใช้ประโยชน์จากโบนัสเสียงห้องสมุด ! หมายเหตุ
* เพียงหนึ่งไฟล์ pcg สามารถโหลดได้ตลอดเวลา
* ก่อนที่คุณโหลดไฟล์ pcg เหล่านี้ ให้แน่ใจว่า คุณไม่คิดการสูญเสียข้อมูลใด ๆที่
ปัจจุบัน Kross ของคุณ กรุณาบันทึกข้อมูลที่สำคัญๆ ลงบนการ์ด SD ล่วงหน้า .
* ในขั้นตอนที่ 4 หากคุณเลือก " bonus1 . pcg . " และโหลดข้อมูล pcg โหลดข้อมูลทั้งหมดรวมทั้ง
โปรแกรม ชุด ดรัมคิท arpeggiator , รูปแบบและข้อมูลทั่วโลกจะถูกเขียนทับ
ในทํานองเดียวกัน ถ้าคุณเลือก " bonus1 .pcg " และ " โปรแกรม " แล้วโหลดข้อมูล pcg , ยูเอสบี
โปรแกรมจะถูกเขียนทับ ดังนั้น ถ้าคุณเก็บโปรแกรมต้นฉบับของคุณในธนาคาร A-D , โปรแกรมเหล่านั้น
จะถูกแทนที่ กรุณาตรวจสอบให้แน่ใจว่าคุณการสำรองข้อมูลที่สำคัญใด ๆใน Kross ของคุณ
ก่อนติดตั้งโบนัสนี้ห้องสมุดเสียง
การแปล กรุณารอสักครู่..