In this case, to track an MT location, TCH channel (traffic channel) is allocated to the MT, and the terminal
starts operation data exchange with the corresponding base station via the channel. The system requests
the MT to transmit the operation data, whereas the MT should be transmitting data at a max rate. MT data
is transmitted each 4,615 milliseconds (according to GSM specification). MT will then start to be constantly
active at max power, which allows for its further search using МРТ-200 GSM receiver and a directional
antenna. In this mode, the System operator can make a call to the MT connected to the network, and
conduct a call session, or send a Short Message.
In this case, to track an MT location, TCH channel (traffic channel) is allocated to the MT, and the terminalstarts operation data exchange with the corresponding base station via the channel. The system requeststhe MT to transmit the operation data, whereas the MT should be transmitting data at a max rate. MT datais transmitted each 4,615 milliseconds (according to GSM specification). MT will then start to be constantlyactive at max power, which allows for its further search using МРТ-200 GSM receiver and a directionalantenna. In this mode, the System operator can make a call to the MT connected to the network, andconduct a call session, or send a Short Message.
การแปล กรุณารอสักครู่..
