The objectives of the work are, first, to determine the combustion characteristics of crude glycerol, a byproduct
of the synthesis of biodiesel and, second, to systematically investigate the relationship between
the behaviors observed and the presence of different components. With that purpose, the combustion of
droplets of crude glycerol was studied in a drop tube facility and compared with different blends of pure
glycerol with water, alcohol and salts. The evolution of drop size was determined from pictures recorded
with a CCD camera and a long distance microscope. After injection, the droplet size initially remains
about constant (initial liquid heating) and then decreases depicting a curve in good agreement with
the d2
-law. At some distance from injection, the droplets were shattered due to microexplosions, producing
in most cases small fragments. The combustion curves for crude glycerol were compared with those
for pure glycerol and its blends with water, alcohols and salts. Pure glycerol droplets displayed a combustion
rate practically identical to that of crude glycerol, but did not experience microexplosions. These
phenomena could be due to the presence of water or alcohols, with much lower boiling temperatures,
but the experiments performed for a wide range of blends of pure glycerol with water, ethanol and/or
methanol did not exhibit any kind of disruptive behavior. Additional tests performed with blends of pure
glycerol containing alkali salts consistently showed the occurrence of microexplosions, even when the
salt was dissolved in pure glycerol without adding any water or alcohol. It was then concluded that
the microexplosions observed for crude glycerol droplets were actually induced by the decomposition
of alkali salts, and not to the explosive evaporation of water or alcohols as initially expected