Oil is water pollution caused by cleaning dirt. The transfer of oil and grease waste from houses and shops. Car and motorcycle repair shop Industrial factory Environmental management is an issue that should be resolved properly. This research study on the fiber absorbs oil from scratch. Leading agricultural residues to produce oil absorbent material. Through the process of preparing the mixture viscosity (Viscose Process) by taking the base of the leaves from light and leaves from the source through the baking process moisture and grinding, it is then reacted with sodium Hydroxide, then take the second. only residue left incubation Then react with carbon disulfide. Then again reacts with sodium Hydroxide dilute concentration of 10 percent by weight of the mixture will be thick. The viscosity of the mixture was mixed with the sodium salt of the acid. Left to die in a wire mesh size 7x7x1.5 cm fiber tends to absorb oil. In the studied material suitable for the production of fibers absorb oil by studying the most suitable material to produce a cone of leaves from light and leaves from young and efficiency of absorption of the mixture viscosity conditions. differ By studying the concentration of sodium Hydroxide affecting the viscosity of the oil. Carbon disulfide can affect the viscosity of the oil. And the ratio of sodium to salt mixture viscosity affecting the absorption of fiber absorbs oil from scratch.