The X-ray diffraction patterns of raw bentonite and CTMAB-Bent were shown inFig. 1, exhibiting bentonite typical diffraction peak at 2θof about 5°. The 2θvalues of raw bentonite and CTMAB-Bent were 6.04 and 4.66, respectively. The peak shifts from the right side to the left side, indicating the expansion ofd001spacing and the completeness
of crystal structure. The calculatedd001distance of 15.4 Å conformed to the main compensating cations of calcium and magnesium. After being CTMAB modified, thed001value increased to 18.97 Å, suggesting that
the surfactant CTMA+ ions entered into the interlayer space of the bentonite by ion exchange.The FTIR spectra of raw bentonite and CTMAB-Bent, in the range of 4000 to 400 cm−1, were given in Fig. 2. The peaks at 1039, 520 and 470 cm−1 were due to stretching vibration of Si–O, bending vibration of Si–O–Al and Si–O–Si, respectively, exhibiting the initial structure ofnraw bentonite. The bands at 2920 and 2851 cm−1 were only observed for CTMAB-Bent. They could be assigned to the anti-symmetric and symmetric stretching vibration modes of–CH3and–CH2. In addition, the banding vibration of–CH3was observed at 1469 cm−1 in organic intercalator. The relative wide peaks at 1640, 3440 and 3632 cm
−1
,observed in both raw bentonite and CTMAB-Bent, were attributed to–OH
deformation of water, but the peak intensity of CTMAB-Bent was lower
than that of raw bentonite. This may be the evidence for the increased
hydrophobic nature of bentonite surface due to the CTMAB addition
[6,36,37].
From the results of BET surface area measurement, the specificsurface area of CTMAB-Bent (4.42 m
2
/g) was smaller than that of raw bentonite (10.2 m
2
/g), indicating that organic molecules entered into the
interlayers of bentonite and overlapped its surface, thus blocking the
channel between the layers and reducing the specific surface area
[38]. The pore volume and pore size diameter of CTMAB-Bent and raw
bentonite were 0.0179 cm
3
/g, 0.0307 cm
3
/g, 3.12 nm and 3.52 nm,
respectively.
The X-ray diffraction patterns of raw bentonite and CTMAB-Bent were shown inFig. 1, exhibiting bentonite typical diffraction peak at 2θof about 5°. The 2θvalues of raw bentonite and CTMAB-Bent were 6.04 and 4.66, respectively. The peak shifts from the right side to the left side, indicating the expansion ofd001spacing and the completenessof crystal structure. The calculatedd001distance of 15.4 Å conformed to the main compensating cations of calcium and magnesium. After being CTMAB modified, thed001value increased to 18.97 Å, suggesting thatthe surfactant CTMA+ ions entered into the interlayer space of the bentonite by ion exchange.The FTIR spectra of raw bentonite and CTMAB-Bent, in the range of 4000 to 400 cm−1, were given in Fig. 2. The peaks at 1039, 520 and 470 cm−1 were due to stretching vibration of Si–O, bending vibration of Si–O–Al and Si–O–Si, respectively, exhibiting the initial structure ofnraw bentonite. The bands at 2920 and 2851 cm−1 were only observed for CTMAB-Bent. They could be assigned to the anti-symmetric and symmetric stretching vibration modes of–CH3and–CH2. In addition, the banding vibration of–CH3was observed at 1469 cm−1 in organic intercalator. The relative wide peaks at 1640, 3440 and 3632 cm−1,observed in both raw bentonite and CTMAB-Bent, were attributed to–OHdeformation of water, but the peak intensity of CTMAB-Bent was lowerthan that of raw bentonite. This may be the evidence for the increasedhydrophobic nature of bentonite surface due to the CTMAB addition[6,36,37].From the results of BET surface area measurement, the specificsurface area of CTMAB-Bent (4.42 m2/g) was smaller than that of raw bentonite (10.2 m2/g), indicating that organic molecules entered into theinterlayers of bentonite and overlapped its surface, thus blocking thechannel between the layers and reducing the specific surface area[38]. The pore volume and pore size diameter of CTMAB-Bent and rawbentonite were 0.0179 cm3/g, 0.0307 cm3/g, 3.12 nm and 3.52 nm,respectively.
การแปล กรุณารอสักครู่..

รูปแบบการเลี้ยวเบนรังสีเอกซ์ของเบนโทไนท์ดิบและ CTMAB-ก้มมีการแสดง inFig 1, การแสดงจุดสูงสุดเลนส์ทั่วไปเบนโทไนท์ที่2θofประมาณ 5 ° 2θvaluesของเบนโทไนท์ดิบและ CTMAB-ก้มมี 6.04 และ 4.66 ตามลำดับ กะสูงสุดจากด้านขวาไปทางด้านซ้ายแสดงให้เห็น ofd001spacing
การขยายตัวและความสมบูรณ์ของโครงสร้างผลึก calculatedd001distance 15.4 Åสอดคล้องกับไพเพอร์ชดเชยหลักของแคลเซียมและแมกนีเซียม หลังจากที่ถูก CTMAB แก้ไข thed001value เพิ่มขึ้น 18.97
Åบอกว่าลดแรงตึงผิวCTMA + ไอออนป้อนเข้าสู่พื้นที่ interlayer ของเบนโทไนต์โดยไอออนสเปกตรัม exchange.The FTIR ของเบนโทไนท์ดิบและ CTMAB-ก้มในช่วง 4000 ถึง 400 ซม. 1 , ได้รับในรูป 2. ยอดที่ 1,039, 520 และ 470 ซม-1 มีกำหนดจะยืดการสั่นสะเทือนของ Si-O, ดัดการสั่นสะเทือนของ Si-O-Al และ Si-O-Si ตามลำดับแสดงโครงสร้างเริ่มต้น ofnraw เบนโทไนท์ วงดนตรีที่ 2,920 และ 2,851 ซม-1 พบเพียง แต่สำหรับ CTMAB-ก้ม พวกเขาอาจจะได้รับมอบหมายให้ต่อต้านสมมาตรและสมมาตรยืดโหมดการสั่นสะเทือนของ CH3and-CH2 นอกจากนี้ยังมีการสั่นสะเทือนของแถบ CH3was สังเกตที่ 1469 ซม-1 intercalator อินทรีย์ ยอดเขาที่กว้างญาติที่ 1640, 3440 และ 3632 ซม.
-1
สังเกตทั้งดิบและเบนโทไนท์
CTMAB-ก้มถูกประกอบกับโอความผิดปกติของน้ำแต่ความเข้มของจุดสูงสุดของ
CTMAB-ก้มต่ำกว่าของเบนโทไนท์ดิบ นี้อาจจะเป็นหลักฐานสำหรับการเพิ่มขึ้นของธรรมชาติน้ำของพื้นผิวเบนโทไนท์เนื่องจากการนอกจาก CTMAB [6,36,37]. จากผลการตรวจวัดพื้นที่ผิวการพนันในพื้นที่ของ specificsurface CTMAB-Bent (4.42 ม. 2 / g) เป็น ที่มีขนาดเล็กกว่าของเบนโทไนท์ดิบ (10.2 ม. 2 / g) แสดงให้เห็นว่าโมเลกุลของสารอินทรีย์ป้อนเข้าสู่interlayers ของเบนโทไนท์และซ้อนทับพื้นผิวของมันจึงปิดกั้นช่องระหว่างชั้นและลดพื้นที่ผิวที่เฉพาะเจาะจง[38] ปริมาณรูขุมขนและขนาดเส้นผ่าศูนย์กลางขนาดรูขุมขนของ CTMAB-ก้มและดิบเบนโทไนท์เป็น0.0179 ซม. 3 / g 0.0307 ซม. 3 / g 3.12 นาโนเมตรและ 3.52 นาโนเมตรตามลำดับ
การแปล กรุณารอสักครู่..

มีรูปแบบการเลี้ยวเบนรังสีเอ็กซ์ของดิบและเบนโทไนท์ ctmab งอถูกแสดง infig . 1 , exhibiting เบนโทไนท์โดยทั่วไปเลนส์สูงสุดที่ 2 θประมาณ 5 องศา . 2 θค่าวัตถุดิบและสาร ctmab งอและจำนวน 6.04 4.66 ตามลำดับ ยอดกะจากด้านขวาไปด้านซ้าย ระบุว่า การขยายตัว ofd001spacing และความครบถ้วน
โครงสร้างของผลึก การ calculatedd001distance 15 .4 •สอดคล้องกับหลักการชดเชยไอออนของแคลเซียมและแมกนีเซียม หลังจากถูก ctmab ดัดแปลง thed001value เพิ่มขึ้น 18.97 •บอกว่า
ctma สารลดแรงตึงผิวประจุเข้าไปในชั้นอวกาศของเบนทอไนต์โดยการแลกเปลี่ยนไอออน ( สเปกตรัมของเบนทอไนต์ดิบและ ctmab งอ ในช่วง 4 , 400 cm − 1 , ได้รับในรูปที่ 2 ยอดที่ 1 , 039 ,520 และ 470 cm − 1 ) เนื่องจากการยืดการสั่นสะเทือนของศรี– O – O – การสั่นสะเทือนของซีอัลและศรี– O –ศรีตามลำดับการดัด ซึ่งเบื้องต้นโครงสร้าง ofnraw แพง วงดนตรีที่ 2920 2851 cm − 1 เท่านั้นและเป็นสังเกตสำหรับ ctmab งอ พวกเขาอาจจะได้รับมอบหมายให้ป้องกันการสั่นของสมมาตรและสมมาตรยืด– ch3and – C . นอกจากนี้ที่แถบสั่นสะเทือน– ch3was สังเกตที่ 734 cm − 1 ในอินทรีย์ intercalator . เทียบกับยอด ณ กว้าง 1 เซนติเมตร 3632 1640 และ− 1
สังเกตทั้งเบนโทไนต์ดิบและ ctmab งออยู่ ประกอบกับ –โอ้
รูปของน้ำ แต่ความเข้มสูงสุดของ ctmab งอต่ำกว่า
กว่าวัตถุดิบแพง นี้อาจจะมีหลักฐานเพิ่มขึ้น
ธรรมชาติ ) ของผิวเนื่องจากการ ctmab นอกจากนี้
[ ]
6,36,37 แพง จากผลของการเดิมพันการวัดพื้นที่ผิว , specificsurface พื้นที่ ctmab งอ ( 4.42 เมตร
2
/ G ) มีขนาดเล็กกว่าของเบนทอไนต์ดิบ ( 10.2 m
2
/ G ) แสดงว่าโมเลกุลอินทรีย์เข้ามา
interlayers เบนโทไนท์กันพื้นผิวของมันจึงปิดกั้น
ช่องระหว่างชั้น และลดพื้นที่ผิวจำเพาะ
[ 38 ] รูขุมขนปริมาณและขนาดรูพรุนขนาดงอ ctmab และดิบ
เบนโทไนต์ 0.0179 cm
3
/ g , 0.0307 cm
3
/ g , 3.12 nm และ 3.52 nm
ตามลำดับ
การแปล กรุณารอสักครู่..
