On the other hand, some discrepancies were observed when
these results were compared with previous studies on lycopene
solubility (Gomez-Prieto et al., 2003; Vasapollo et al., 2004; Topal
et al., 2006). Vasapollo et al. (2004) have calculated the constants
k, a, and b at 34 MPa for different temperature values to be 4.643,
5157, and 21.17, respectively. Topal et al. (2006) have determined
the constants k, a, and b at pressure and temperature range
studied in this work. The constants k, a, and b obtained were 8.59,
5565 and 45.65, respectively. Gomez-Prieto et al. (2003) also
reported the calculated parameters of solubility of trans-lycopene
in SCCO2, obtaining the Chrastil equation points by combining CO2
densities between 400 and 800 g/L with extraction vessel temperatures
of 50, 60, and 70 C. For all-trans-lycopene, constant k, a, and b
values were calculated as 8.06, 4336.06, and 47.63, respectively.
The differences of the constants k, a, and b obtained may be caused
by the differences of the extraction system used. In this work, the
tomato seed oil was used to enhance the extraction rate, and as
the result higher concentration or solubility of lycopene in SCCO2
was obtained. In addition, the measurement of lycopene solubility
is possibly affected by factors such as the experimental method,
sampling method, method of quantification, method of measurement
of solubility, degradation of lycopene, and the degree of purity
of the starting material (Shi et al., 2009b). In comparison with
On the other hand, some discrepancies were observed whenthese results were compared with previous studies on lycopenesolubility (Gomez-Prieto et al., 2003; Vasapollo et al., 2004; Topalet al., 2006). Vasapollo et al. (2004) have calculated the constantsk, a, and b at 34 MPa for different temperature values to be 4.643,5157, and 21.17, respectively. Topal et al. (2006) have determinedthe constants k, a, and b at pressure and temperature rangestudied in this work. The constants k, a, and b obtained were 8.59,5565 and 45.65, respectively. Gomez-Prieto et al. (2003) alsoreported the calculated parameters of solubility of trans-lycopenein SCCO2, obtaining the Chrastil equation points by combining CO2densities between 400 and 800 g/L with extraction vessel temperaturesof 50, 60, and 70 C. For all-trans-lycopene, constant k, a, and bvalues were calculated as 8.06, 4336.06, and 47.63, respectively.The differences of the constants k, a, and b obtained may be causedby the differences of the extraction system used. In this work, thetomato seed oil was used to enhance the extraction rate, and asthe result higher concentration or solubility of lycopene in SCCO2was obtained. In addition, the measurement of lycopene solubilityis possibly affected by factors such as the experimental method,sampling method, method of quantification, method of measurementof solubility, degradation of lycopene, and the degree of purityof the starting material (Shi et al., 2009b). In comparison with
การแปล กรุณารอสักครู่..

ในทางกลับกันความแตกต่างบางคนตั้งข้อสังเกตเมื่อผลลัพธ์เหล่านี้ถูกนำมาเปรียบเทียบกับการศึกษาก่อนหน้านี้ไลโคปีนสามารถในการละลาย(โกเมซ-ฆี et al, 2003;. Vasapollo et al, 2004;. โทปาล. et al, 2006) Vasapollo et al, (2004) มีการคำนวณค่าคงk, และข 34 MPa ค่าอุณหภูมิที่แตกต่างกันจะเป็น 4.643,? 5157 และ? 21.17 ตามลำดับ เม็ตโทปาล, et al (2006) ได้กำหนดคงที่k, และขที่ความดันและอุณหภูมิช่วงการศึกษาในงานนี้ ค่าคงที่ k, และขที่ได้รับเป็น 8.59,? 5565 และ? 45.65 ตามลำดับ โกเมซ-ฆี et al, (2003) นอกจากนี้ยังมีรายงานพารามิเตอร์คำนวณของการละลายของทรานส์ไลโคปีนใน SCCO2 ได้รับจุดสม Chrastil CO2 โดยการรวมความหนาแน่นระหว่าง400 และ 800 กรัม / ลิตรมีอุณหภูมิเรือสกัด50, 60, และ 70 องศาเซลเซียส สำหรับทุกทรานส์ไลโคปีน k คงที่และขค่านี้จะถูกคำนวณเป็น8.06? 4,336.06 และ? 47.63 ตามลำดับ. ความแตกต่างของค่าคง k, และขที่ได้รับอาจจะเกิดจากความแตกต่างของการสกัดที่ระบบที่ใช้ ในงานนี้น้ำมันเมล็ดมะเขือเทศถูกนำมาใช้เพื่อเพิ่มอัตราการสกัดน้ำมันและเป็นผลความเข้มข้นที่สูงขึ้นหรือการละลายของไลโคปีนในSCCO2 ที่ได้รับ นอกจากนี้การวัดความสามารถในการละลายไลโคปีนได้รับผลกระทบอาจจะเป็นจากปัจจัยต่างๆเช่นวิธีการทดลองวิธีการสุ่มตัวอย่างวิธีการปริมาณวิธีการวัดของการละลายสลายตัวของไลโคปีนและระดับของความบริสุทธิ์ของวัสดุเริ่มต้น(ชิเอตอัล , 2009b) ในการเปรียบเทียบกับ
การแปล กรุณารอสักครู่..

บนมืออื่น ๆ บางอย่างไม่พบเมื่อ
ผลเปรียบเทียบกับการศึกษาก่อนหน้าเกี่ยวกับไลโคพีน
การละลาย ( โกเมซี้ ปรีเ ต et al . , 2003 ; vasapollo et al . , 2004 ; topal
et al . , 2006 ) vasapollo et al . ( 2004 ) ได้คำนวณค่าคงที่
K , A และ B ที่อุณหภูมิ 34 MPa ค่าต่าง ๆเป็น 4.643
, 5157 และ 21.17 ตามลำดับ topal et al . ( 2549 ) ได้กำหนด
ค่าคงที่ K , A และ B ที่ความดันและอุณหภูมิ
ศึกษาในงานนี้ ค่าคงที่ K , A และ B ได้ 8.59 ,
และ 5565 45.65 ตามลำดับ โกเมซี้ ปรีเ ต et al . ( 2003 ) นอกจากนี้
รายงานคำนวณพารามิเตอร์ของการละลาย
ไลโคปีนทรานส์ใน scco2 ได้รับคะแนนโดยการรวมสมการ chrastil CO2
ความหนาแน่นระหว่าง 400 และ 800 กรัมต่อลิตร อุณหภูมิ
การสกัดด้วยเรือ50 , 60 และ 70 องศาเซลเซียส สำหรับ ทรานส์ไลโคปีน ค่าคงที่ K , A และ B
ค่าคำนวณตามที่มี , 4336.06 และ 47.63 ตามลำดับ
ความแตกต่างของค่าคงที่ K , A และ B ได้อาจเกิดจาก
โดยความแตกต่างของระบบการสกัดที่ใช้ ในงานนี้
มะเขือเทศเมล็ดน้ำมันถูกใช้เพิ่มอัตราการสกัดและ
ผลของความเข้มข้น หรือการละลายของไลโคปีนใน scco2
ได้ . นอกจากนี้ การวัด Lycopene ละลาย
อาจจะได้รับผลกระทบจากปัจจัยต่างๆ เช่น วิธีทดลอง
การสุ่มตัวอย่างวิธีการปริมาณ วิธีการในการวัด
ของการละลาย การย่อยสลายของไลโคปีน และระดับของความบริสุทธิ์
ของวัสดุเริ่มต้น ( ซือ et al . , 2009b ) ในการเปรียบเทียบกับ
การแปล กรุณารอสักครู่..
