For all procedures, analytical grade reagents were used
throughout. The samples and standards were prepared using
high-purity water with a resistivity of 18.3 MVcm, obtained from a
Direct-Q 3 Water Purification System (Millipore Corporation,
Bedford, USA). All glass apparatus was washed and subsequently
soaked in 10% (v/v) HNO3 (Merck, Darmstadt, Germany) for at least
48 h and then rinsed with ultrapure water before use. Multielemental
working solutions of the analytes were prepared daily
by appropriate dilution of stock solutions (1000 mg/L; Fluka,
Buchs, Germany) in different working ranges (Fe: 1.0–10 mg L1,
Mn and Zn: 0.050–2.0 mg L1,. Mg: 10–40 mg L1, P: 10.0–
200 mg L1). For sample solubilization a 25% (m/v) tetramethylammonium
hydroxide pentahydrate (331635, Sigma–Aldrich,
Munich, Germany) was used.
For all procedures, analytical grade reagents were used
throughout. The samples and standards were prepared using
high-purity water with a resistivity of 18.3 MVcm, obtained from a
Direct-Q 3 Water Purification System (Millipore Corporation,
Bedford, USA). All glass apparatus was washed and subsequently
soaked in 10% (v/v) HNO3 (Merck, Darmstadt, Germany) for at least
48 h and then rinsed with ultrapure water before use. Multielemental
working solutions of the analytes were prepared daily
by appropriate dilution of stock solutions (1000 mg/L; Fluka,
Buchs, Germany) in different working ranges (Fe: 1.0–10 mg L1,
Mn and Zn: 0.050–2.0 mg L1,. Mg: 10–40 mg L1, P: 10.0–
200 mg L1). For sample solubilization a 25% (m/v) tetramethylammonium
hydroxide pentahydrate (331635, Sigma–Aldrich,
Munich, Germany) was used.
การแปล กรุณารอสักครู่..

สำหรับขั้นตอนทั้งหมด , สารเคมีเกรดวิเคราะห์ใช้
ตลอด ตัวอย่างมาตรฐาน และเตรียมใช้
มีความบริสุทธิ์สูง น้ำที่มีค่าความต้านทานจำเพาะของ mvcm อย่างมีนัยสำคัญที่วัดได้จาก
direct-q 3 น้ำบริสุทธิ์ระบบ ( มิลลิ Corporation
Bedford , สหรัฐอเมริกา ) ทั้งหมดเครื่องมือล้างแก้วและต่อมา
แช่ 10% ( v / v ) กรดดินประสิว ( เมอร์คดาร์มสตัดท์ , เยอรมนี ) อย่างน้อย
48 ชั่วโมง แล้วล้างด้วยน้ำที่บริสุทธิ์มากก่อนใช้ multielemental
ทำงานโซลูชั่นของสารถูกเตรียมโดยการเจือจางที่เหมาะสมของหุ้นรายวัน
โซลูชั่น ( 1000 มก. / ล. fluka
buchs , Germany ) ในช่วงการทำงานที่แตกต่างกัน ( Fe : 1.0 – 10 มิลลิกรัมต่อลิตร 1
Mn และ Zn : 0.050 – 2.0 mg L 1 . มิลลิกรัม : 10 – 40 มิลลิกรัมต่อลิตร 1 P : 10.0 –
200 mg L 1 ) สำหรับการสกัดตัวอย่าง 25 % ( M / V )
tetramethylammoniumโซดาไฟ ( 331635 Pentahydrate , Sigma – Aldrich
มิวนิก , เยอรมนี ) คือใช้
การแปล กรุณารอสักครู่..
