Project a study comparing the measured intensity of far infrared on the plane. The sensors measure the radiation from 1 type is Net Radiometer and The device created. The device itself is made up of sheets of aluminum black round diameter 1.56 cm 2 splice plates A thermocutples K type temperature sensor is inserted in the middle between the two plates. To measure the intensity of the radiation is done by bringing Net Radiometer and test strips to radiation emitted from. Far infrared long cylindrical tube at the same location. The voltage from the sensor Net Radiometer The temperature of the radiation plate and the ambient air temperature at the thermocouple cut are taken to calculate the intensity of radiation from theory to compare.
The results showed that the intensity of the far infrared radiation was measured Net Radiometer squared inverse compliance. By the R2 = 0.9939 The concentration of far infrared radiation was measured by a thermocouples consistent inverse square. By the R2 = 1 also found a correlation between the intensity of the far infrared (I) The difference between the temperature of the radiation plate to ambient temperature (∆T) Consistent with polynomials (Polynomial) 4th power equation 1 = 0.1239_T3 + = 1.4202_T3 + = 4.7761_T2 + = 1.9036_T + = 1.4676 By the R2 = 0.9963 When compared against the intensity of the radiation measured by the International Digital Potentiometer with thermocouple at any point. On a plane parallel to the tube Far infrared Showed a consistent trend towards the same.