shown that production of plants with high potential of phytoremediation and biomass production is effective to
improve phytoremediation method. The inoculation of the effective genes in accumulation of the metals to the plants
which are taller than the natural plants will cause increase of final biomass production [8].
Phytoremediation methods have some limitations, for example, in a type of this method, phytoremediation method is
effective at the range of three-feet from soil surface and maximum 60-feet from the underground waters. This
method is applied vastly for the places which pollution density in them is between low to average level and is
severely dependent on the soil acidity [2].
The results of research activities made by scientists indicate that soil acidity increases availability of metals to a
great extent. Of course, acidic soil may have negative effects. For example, increased solubility of some toxic metals
and washing them to the underground waters will cause outbreak of environmental hazards which should be
controlled under specific conditions [9].
Consuming Phytoremediation Products
The way of consuming contaminated plants is one of the barriers to commercial implementation of
phytoremediation. After harvesting, soil pollution is reduced by the plant but a great amount of dangerous biomass is
produced. The studies show that compost production and condensation are the two methods which were proposed by
many researchers for the biomass management of the contaminated plants. Thermo-chemical change is the best
method for consuming biomasses produced by phytoremediation. As an energy source, biomass has commercial
usage in this method. This biomass includes carbon, hydrogen and oxygen which are known as oxygenated
hydrocarbons. Hemicelluloses, cellulose, minerals and ash is the main component of each lignin biomass which
enjoy a high amount of humidity, volatile materials and bulk density but have low thermal value. The percent of
these components varies from species to species, in which, management of this volume of waste is a difficult task
and needs volume reduction [12].
Energy Production
Incinerating and producing gas is the important methods for generating thermal and electrical energy which can be
extracted from the infected plants. Recycling this energy from biomass, by incinerating or producing gas, can have
economic value, because, it cannot be consumed as fodder or fertilizer. Incinerating is a simple method which
should be put under strict controlled situations. In this method, biomass is decreased between 2 to 5 percent and ash
can be consumed appropriately. The studies have shown that incinerating dangerous wastes, containing metals, is
not correct and logical in an open-air space, because, the gases released to the environment may be harmful. Under
such circumstances, volume is only reduced and the produced heat is wasted.
The studies made by the Bureau to Study Water and Soil Pollution of the Department of the Environment (DoE)
show that gas production is one of the cases for controlling biomass which is produced through a series of chemical
changes of the clean combustion gases with high thermal efficiency. So, this gas combination is called "Pyro Gas"
which can be incinerated for producing thermal and electrical energy.
Gas production is carried out in a gas exchanger within complicated stages of drying, heating, thermal
decomposition and chemical reactions of combustion which is occurred simultaneously. The researchers have
reported that pyrolysis is a new method for the management of urban wastes and it is possible to use it for biomass
management of the contaminated plants. Pyrolysis decomposes materials under anaerobic situations and has no air
emissions [3, 7].
Thus, heavy metals remain in the coke which can be used in the melting furnace. Although high cost of
establishment and operating procedures is a restricting factor, if used only for the plant, it can be suitable for the
pollutant plants and urban wastes. The researchers have conducted research activities on plant species with high
biomass and have shown that this method can have both positive results and effective environmental benefits.
Removal of Soil Oil Pollutions through Using Phytoremediation Technique
Oil pollution is an inevitable consequence of rapid population growth and industrialization process. In the same
direction, soil pollution by the oil hydrocarbon materials can be observed vastly around exploration and refining
installations typically via transfer routes of these materials across southern oilfield provinces of the country
In addition to the direct emission of these pollutants, the dusts from burning gases with oil have added toxic and
harmful materials to the soils of the region for many years. Moreover having vast impact on ecosystem of the region,
these pollutants are penetrated into the food chain and also human communities gradually and consequently,
threaten health of human beings.
แสดงให้เห็นว่าการผลิตพืชที่มีศักยภาพสูงของวัชพืชและผลผลิตมวลชีวภาพผล
ปรับปรุงวิธีบําบัด . วัคซีนของยีนที่มีการสะสมของโลหะหนักในพืช
ซึ่งสูงกว่าพืชธรรมชาติจะทำให้เกิดการเพิ่มขึ้นของสุดท้ายการผลิตชีวมวล [ 8 ] .
วิธีบ้าๆ บอๆ มีข้อจำกัด ตัวอย่างเช่นในชนิดของวิธีการนี้ เป็นวิธีการที่มีประสิทธิภาพในการบําบัด
ช่วงสามฟุตจากผิวดินและสูงสุด 60 ฟุตจากน้ำใต้ดิน วิธีนี้ใช้สำหรับสถานที่
อย่างมากมายซึ่งเป็นมลพิษหนาแน่นในระดับน้อยถึงปานกลาง และเป็นหนักขึ้นอยู่กับความเป็นกรดของดิน
[ 2 ]ผลของงานวิจัยที่ทำโดยนักวิทยาศาสตร์พบว่า ความเป็นกรด - ด่างของดิน เพิ่มความพร้อมของโลหะกับ
ขอบเขตที่ดี แน่นอน ดินที่เป็นกรดอาจมีผลกระทบเชิงลบ ตัวอย่างเช่น เพิ่มความสามารถในการละลายของสารพิษโลหะ
และล้างพวกเขาเพื่อให้น้ำใต้ดินจะทำให้เกิดการระบาดของสภาพแวดล้อมที่อันตรายที่ควรถูกควบคุมภายใต้เงื่อนไขที่ระบุไว้
[ 9 ]ผลิตภัณฑ์บําบัดการบริโภค
วิธีการบริโภคพืชปนเปื้อนเป็นหนึ่งในอุปสรรคของการดำเนินการเชิงพาณิชย์ของ
บําบัด . หลังการเก็บเกี่ยว มลพิษในดินจะลดลง โดยโรงงาน แต่เป็นจำนวนเงินที่ดีของชีวมวลอันตราย
ผลิต การศึกษาแสดงให้เห็นว่าการผลิตปุ๋ยหมักและควบแน่นเป็นสองวิธีที่เสนอโดย
นักวิจัยหลายคนที่สามารถจัดการการปนเปื้อนพืช การเปลี่ยนแปลงทางเคมีเทอร์โมเป็นวิธีที่ดีที่สุด
สำหรับการบริโภค BIOMASSES ผลิตโดยบําบัด . เป็นแหล่งพลังงานชีวมวลมีการใช้งานในเชิงพาณิชย์
ในวิธีนี้ ระบบนี้ประกอบด้วยคาร์บอน ไฮโดรเจน และออกซิเจน ซึ่งจะเรียกว่าออกซิเจน
ไฮโดรคาร์บอน . hemicelluloses เซลลูโลสแร่และหินเป็นองค์ประกอบหลักของแต่ละปริมาณชีวมวลที่ปริมาณความชื้น
สนุกระเหยวัสดุและความหนาแน่น แต่จะมีค่าความร้อนต่ำ เปอร์เซ็นต์ของ
ส่วนประกอบเหล่านี้แตกต่างจากสายพันธุ์ชนิดซึ่งในการจัดการของปริมาณของเสียที่เป็น
ยากและความต้องการลดปริมาณ [ 12 ] .
การผลิตพลังงานเผา และผลิตก๊าซเป็นวิธีที่สำคัญสำหรับการสร้างพลังงานไฟฟ้าและความร้อน ซึ่งสามารถ
สกัดจากพืชที่ติดเชื้อ รีไซเคิลพลังงานจากชีวมวล โดยการเผาหรือผลิตก๊าซได้
มูลค่าทางเศรษฐกิจ เพราะมันไม่สามารถใช้เป็นอาหารสัตว์หรือปุ๋ย เผาเป็นวิธีง่าย ๆซึ่ง
ควรใส่ใต้เข้มงวดควบคุมสถานการณ์ในวิธีนี้ , ชีวมวลมีค่าระหว่าง 1 ถึง 5 เปอร์เซ็นต์ และเถ้า
สามารถบริโภคได้อย่างเหมาะสม การศึกษาได้แสดงให้เห็นว่า เผาของเสียอันตรายที่มีโลหะเป็น
ไม่ถูกต้องและตรรกะในพื้นที่กลางแจ้ง เพราะก๊าซที่ปล่อยออกมาสู่สิ่งแวดล้อมอาจเป็นอันตราย ภายใต้สถานการณ์เช่นนี้เป็นเพียง
, ปริมาณที่ลดลง และผลิตความร้อนสูญเปล่า .
การศึกษาทำโดยสำนักศึกษา น้ำและดิน มลพิษของสิ่งแวดล้อมกรม ( DOE )
แสดงให้เห็นว่าการผลิตก๊าซเป็นหนึ่งในกรณีการควบคุมชีวมวลที่ผลิตผ่านชุดของการเปลี่ยนแปลงทางเคมี
สะอาดก๊าซจากการเผาไหม้ที่มีประสิทธิภาพความร้อนสูง ดังนั้น ก๊าซนี้รวมกันเรียกว่า " ไฟแก๊ส
ซึ่งสามารถถูกเผาเพื่อผลิตพลังงานไฟฟ้าและความร้อน .
การผลิตก๊าซ การแลกเปลี่ยนก๊าซในภายในที่ซับซ้อนขั้นตอนของการอบแห้ง , ความร้อน , ความร้อนและการย่อยสลาย
ปฏิกิริยาเคมีการเผาไหม้ซึ่งเกิดขึ้นพร้อมกัน นักวิจัยได้รายงานว่า ไพโรไลซิส
เป็นวิธีการใหม่ในการจัดการของเสียในเมืองและมันเป็นไปได้ที่จะใช้มันสำหรับชีวมวล
การจัดการของการปนเปื้อนในพืช ไพโรไลซิสของวัสดุภายใต้สภาวะไร้อากาศสลายตัวและไม่มีการปล่อยอากาศ
[ 7 ] .
ดังนั้นโลหะหนักอยู่ในโค้ก ซึ่งสามารถใช้ในเตาหลอม . แม้ว่าค่าใช้จ่ายสูงของ
ก่อตั้ง และกระบวนการดำเนินงานเป็นปัจจัยจำกัด ถ้าใช้แค่ต้น มันอาจจะเหมาะสำหรับ
มลพิษพืชและของเสียชุมชนนักวิจัยมีกิจกรรมการวิจัยในพืชด้วยมวลชีวภาพสูง
แสดงให้เห็นว่า วิธีนี้จะได้ผล และมีประสิทธิภาพ ทั้งด้านบวกผลประโยชน์ด้านสิ่งแวดล้อม การกำจัดมลพิษน้ำมันดิน
น้ำมันโดยใช้เทคนิคการบําบัดมลพิษผลที่หลีกเลี่ยงไม่ได้ของการเพิ่มประชากรอย่างรวดเร็วและอุตสาหกรรมกระบวนการ ในทิศทางเดียวกัน
,มลพิษทางดิน โดยน้ำมันและวัสดุสามารถสังเกตได้อย่างมากมายรอบสำรวจและการกลั่น การติดตั้งโดยทั่วไปผ่านการโอน
เส้นทางของวัสดุเหล่านี้ในบ่อน้ํามัน จังหวัดทางตอนใต้ของประเทศ
นอกจากการปล่อยโดยตรงของสารมลพิษเหล่านี้ ฝุ่นละอองจากการเผาแก๊สกับน้ำมันได้เพิ่มที่เป็นพิษและเป็นอันตรายวัสดุ
ดินของภูมิภาคสำหรับหลาย ปีนอกจากนี้ จะมีผลกระทบมากมายต่อระบบนิเวศของพื้นที่ ,
มลพิษเหล่านี้จะซึมซาบเข้าสู่ห่วงโซ่อาหารของมนุษย์ชุมชนและยังค่อยๆส่งผล
คุกคามสุขภาพของมนุษย์
การแปล กรุณารอสักครู่..
