Product name: Goldstar Premium Plate Developer
Product code: 5293535
Supplier: KODAK LIMITED, Hemel One, Boundary Way, Hemel Hempstead, HP2 7YU, Great Britain
IN EMERGENCY, telephone: 0870-2430270. Available during office hours only.
For further information about this product, telephone 0870-2430270 or email kes@kodak.com.
Synonyms: F1722
Product Use: photographic processing chemical (developer/activator), For industrial use only.
2. Hazards identification
This Safety Data Sheet conforms to REACH Regulation (EC) 1907/2006.
Product: Irritant. Irritating to eyes and skin.
4. First aid measures
Inhalation: If symptomatic, move to fresh air. Get medical attention if symptoms occur.
Eyes: In case of contact with eyes, flush immediately with plenty of water and seek medical attention.
Skin: Immediately flush with plenty of water for at least 15 minutes and wash using soap. Get medical attention
if symptoms occur.
Ingestion: Do NOT induce vomiting. Give victim a glass of water. Get medical attention immediately. Never
give anything by mouth to an unconscious person.
5. Fire-fighting measures
Extinguishing Media: The product is not flammable. Use appropriate agent for adjacent fire.
Special Fire-Fighting Procedures: No special fire fighting procedure is necessary.
Hazardous Combustion Products: None.
6. Accidental release measures
Personal precautions: See Section 8 for recommendations on the use of personal protective equipment.
Environmental precautions: Prevent spillage from entering drains. Absorb spill with vermiculite or other inert
absorbant material such as sand or earth, then place in a suitable container for proper disposal. Clean surface
thoroughly with water to remove residual contamination.
Waste disposal: Contaminated absorbent should be disposed of in accordance with local regulations.
7. Handling and storage
Personal precautions: Avoid breathing mist or vapour. Avoid contact with eyes, skin, and clothing. Wash
thoroughly after handling. Use with adequate ventilation.
Prevention of Fire and Explosion: No special precautionary measures should be needed under anticipated
conditions of use.
Storage: Cool conditions (5 - 30°C). Keep container tightly closed. Keep away from incompatible substances
(see Incompatibility section.)
Ventilation: Match ventilation rates to conditions of use so as not to exceed any applicable exposure limits (see
Section 8). Good general ventilation of 10 or more room volumes per hour in the work area is recommended.
8. Exposure controls/personal protection
Occupational exposure controls: Not established
Ventilation: Avoid exposure to mists and vapours by mixing solutions in closed vessels and/or under local
exhaust ventilation. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions.
Respiratory protection: None should be needed under normal conditions of use.
Eye protection: Wear safety glasses with side shields or protective goggles whenever mixing or handling
solutions.
Skin and body protection: Using the information provided in Section 2, seek the advice of the glove supplier
as to the most suitable glove material. Avoid skin contact when mixing or handling the substance/preparation or
a mixture by wearing impervious gloves and protective clothing appropriate to the risk of exposure.
Use chemical resistant gloves. In case of prolonged immersion or frequently repeated contact:
Material Thickness Breakthrough time
Nitrile rubber >= 0.38 mm > 480 min
Neoprene >= 0.65 mm > 240 min
butyl-rubber >= 0.36 mm > 480 min