Micropropagation is currently the most popular method for orchid propagation through the production of protocorm-like bodies (PLBs). It is suggested that converting the PLBs into artificial seeds by encapsulation with sodium alginate can be useful for short-term preservation and distribution to the laboratories and commercial nurseries. Prior to the production of artificial seeds, the best developmental stage of PLBs based on sizes for increased conversion to plantlet was determined. PLBs were categorized based on size and presence of shoot namely ≤2 mm (S1), >2–4 mm (S2), >4–6 mm (S3), >2–4 mm with shoot (S4) and >4–6 mm with shoot (S5). S4 and S5 gave significantly higher conversion percentage (85 and 90 %, respectively) as compared to the PLBs without shoot (S1, S2 and S3). Thus, for uniformity PLBs of 3–5 mm with shoot were used for encapsulation with sodium alginate to form artificial seeds. The feasibility of germinating artificial seeds of Dendrobium Shavin White in different substrates namely; M1 (semi-solid ½ Murashige and Skoog (1962) basal medium), M2 (cotton irrigated with sterilized liquid ½ MS basal medium), M3 (cotton irrigated with sterilized distilled water) and M4 (cotton irrigated with non-sterilized distilled water) was tested. The encapsulated PLBs regenerated well in M1 where 96 % of encapsulated PLBs germinated after 12 days of inoculation and 76 % of them converted into plantlet after 37 days of inoculation while PLBs subjected to sterile distilled water gave 56 % germination and 44 % conversion after 42 and 167 days of inoculation respectively. The ability to store encapsulated PLBs would be advantageous for transport of planting materials. Encapsulated PLBs survived longer when stored at 25 ± 2 °C compared to 4 °C, 10 °C and 30 ± 2 °C whereby storage up to 75 days retained 80–92 % survival. Further storage up to 135 days retained 52 % survival. All plantlets survived after acclimatization when transferred to charcoal media under shade.
Micropropagation กำลังนิยมวิธีการขยายพันธุ์กล้วยไม้ผ่านการผลิตของร่างกายเหมือน protocorm (PLBs) แนะนำว่า แปลง PLBs ที่เป็นเมล็ดเทียม โดย encapsulation ด้วยโซเดียมแอลจิเนตจะมีประโยชน์สำหรับระยะสั้นเก็บรักษาและแจกจ่ายไปยังห้องปฏิบัติการและเลี้ยงพาณิชย์ ก่อนการผลิตเมล็ดเทียม ขั้นตอนพัฒนาการที่ดีที่สุดของอิงขนาดสำหรับ conversion เพิ่มขึ้นถึง plantlet PLBs ที่ถูกกำหนด PLBs ถูกแบ่งประเภทตามขนาดและสถานะการออนไลน์ของการยิงคือ ≤2 มม. (S1), > 2 – 4 มม. (S2), > 4 – 6 มม. (S3), > 2 – 4 มม.พร้อมยิง (S4) และ > 4 – 6 มม.พร้อมยิง (S5) S4 และ S5 ให้เปอร์เซ็นต์การแปลงสูง (85 ถึง 90% ตามลำดับ) เมื่อเปรียบเทียบกับ PLBs ไม่ยิง (S1, S2 และ S3) ดังนั้น สำหรับความสม่ำเสมอ PLBs 3 – 5 มม.พร้อมยิงใช้สำหรับ encapsulation ด้วยโซเดียมแอลจิเนตเมล็ดเทียมแบบฟอร์ม ความเป็นไปได้ของงอกเมล็ดเทียมดอก Shavin สีขาวในพื้นผิวต่าง ๆ ได้แก่ M1 (กึ่งแข็ง½ Murashige และ Skoog (1962) ฐานปานกลาง), M2 (ล้าง ด้วยฆ่าเชื้อ½ MS ฐานกลางผ้าฝ้าย), M3 (ฝ้ายที่ล้างด้วยน้ำกลั่นที่ฆ่าเชื้อ) และ M4 (ฝ้ายล้าง ด้วยน้ำกลั่นที่ปลอดเชื้อ) ได้รับการทดสอบ PLBs สรุปที่สร้างใหม่ใน M1 ที่ 96% ของ PLBs สรุปงอกหลังจาก 12 วันกักบริเวณ และ 76% ของพวกเขาแปลงเป็น plantlet หลังจากวันที่ 37 ของดันขณะ PLBs ต้องทำหมันกลั่นน้ำให้แปลงการงอกและ 44% 56% หลัง 42 และ 167 วันกักบริเวณตามลำดับ ความสามารถสรุป PLBs จะเป็นประโยชน์สำหรับขนส่งของวัสดุปลูก สรุป PLBs รอดนานกว่าเมื่อเก็บที่ 25 ± 2 ° C เมื่อเทียบกับ 4 ° C, 10 ° C และ 30 ± 2 ° C โดยจัดเก็บได้ถึง 75 วันสะสม 80-92% อยู่รอด ไปเก็บเพื่อสะสม 135 วัน 52% อยู่รอด ทั้งหมด plantlets รอดหลัง acclimatization เมื่อโอนไปถ่านสื่อภายใต้ร่มเงา
การแปล กรุณารอสักครู่..
