The 4F27E transmission has been around
for a few years now and most of you have
experience with this Mazda-built transmission.
One of the most misunderstood characteristics
of this unit is the shift pattern and
solenoid sequence. The 4F27E uses three
PWM (Pulse Width Modulated) solenoids
and two On/Off solenoids (figure 1).
While both manufacturers use the same
unit, Mazda and Ford each have different
names for the solenoids. Ford solenoids Aand
B (on Mazda, solenoids D and E) are On/Off
solenoids; they operate the 3-4 shift valve and
the TCC control valve. Ford solenoids D, E,
and C (on Mazda, solenoids B, C and A) are
PWM (Pulse Width Modulated) solenoids,
used solely to regulate the oil from the solenoids
to the clutches
The 4F27E transmission has been aroundfor a few years now and most of you haveexperience with this Mazda-built transmission.One of the most misunderstood characteristicsof this unit is the shift pattern andsolenoid sequence. The 4F27E uses threePWM (Pulse Width Modulated) solenoidsand two On/Off solenoids (figure 1).While both manufacturers use the sameunit, Mazda and Ford each have differentnames for the solenoids. Ford solenoids AandB (on Mazda, solenoids D and E) are On/Offsolenoids; they operate the 3-4 shift valve andthe TCC control valve. Ford solenoids D, E,and C (on Mazda, solenoids B, C and A) arePWM (Pulse Width Modulated) solenoids,used solely to regulate the oil from the solenoidsto the clutches
การแปล กรุณารอสักครู่..
การส่ง 4f27e ได้รับรอบไม่กี่ปีตอนนี้ และที่สำคัญที่สุด คุณมีประสบการณ์กับมาสด้านี้สร้างขึ้นในการส่งผ่านหนึ่งในคุณลักษณะส่วนใหญ่เข้าใจผิดของหน่วยนี้จะเปลี่ยนรูปแบบและลำดับขดลวดแม่เหล็กไฟฟ้า การ 4f27e ใช้สามPWM ( Pulse ความกว้างปรับ ) ขดลวดแม่เหล็กไฟฟ้าและสอง เปิด / ปิด ขดลวดแม่เหล็กไฟฟ้า ( รูปที่ 1 )ในขณะที่ผู้ผลิตใช้เหมือนกันหน่วย , มาสด้า และฟอร์ด ต่างมีต่าง ๆชื่อสำหรับขดลวดแม่เหล็กไฟฟ้า . ขดลวดแม่เหล็กไฟฟ้าและฟอร์ดB ( มาสด้า , solenoids D และ E ) เปิด / ปิดขดลวดแม่เหล็กไฟฟ้า ; พวกเขาใช้งาน 3-4 เปลี่ยนวาล์วทีซีซีควบคุมวาล์ว ฟอร์ด solenoids D , Eและ C ( มาสด้า , solenoids B , C และ )PWM ( Pulse โดย solenoids ความกว้าง ) ,ใช้แต่เพียงผู้เดียวเพื่อควบคุมน้ำมันจากขดลวดแม่เหล็กไฟฟ้าในอุ้งมือ
การแปล กรุณารอสักครู่..