nanoparticles. The presence of peaks [100], [101], [102], [110], [103] and [202] observed in PXRD confirm the formation of the ordered structure of NiSe [39]. The absence or less intense [100] peak at 2θ=28.5° (Fig. 2b and e) suggests the probable deficiency at Ni position (Ni1−xSe), which is well supported by reported Ni0.85Se [44]. As the size of the tungsten carbide balls decreased (NiSe_BM3 and NiSe_BM1.6), the intensity of [100] plane has reduced proportionally or became absent. Absence of lower angle peak (2θ=28.5°) represents Ni deficiency (Ni1−xSe) (Fig. 2b) and increase in FWHM of high intensity peak indicates the reduction in particle size (Fig. 2c). Similarly, the absence of [100] plane in the PXRD pattern of the samples NiSe_PN and NiSe_PP (Fig. 2d and e) also indicates the Ni deficiency (Ni1−xSe) with an expected composition of Ni0.85Se [44]. The crystallite size of NiSe_BM10, NiSe_BM5, NiSe_BM3, NiSe_BM1.6 and NiSe_PN, NiSe_PP were calculated by using Scherrer formula and are listed in Table S1. The transmission electron microscopy (TEM) measurements and selected area electron diffraction (SAED) patterns of the sample NiSe_PN confirmed the formation of uniform nanoparticles (Fig. 3a). On the other hand, the surfactant PVP favours the formation of nano rods of NiSe_PP (Fig. 3b). The corresponding SAED reveals crystalline nature in both compounds as shown in inset of Fig. 3a and b. However, as expected, the particles were aggregated in the case of samples synthesized by ball milling method (Fig. 4) [33]. The TEM image of NiSe (Fig. 4) samples milled for 15 min by varying tungsten carbide ball dimension from 10 to 1.6 mm shows the particles are irregular in shape and strongly agglomerated. The average crystallite size calculated from the PXRD patterns using the Scherrer formula is 9 nm
(Table S1). In addition, the SAED pattern (inset in Fig. 4) the NiSe_BM are polycrystalline in nature. Previous results suggest that PVP serves as capping agent and stabilizes the formed nanoparticles against agglomeration, but also plays a role in the formation of specific morphology such as cubes, rods or wires [45]. Infrared (IR) and Xray photoelectron spectroscopy (XPS) studies were used to explain the growth mechanism, wherein observed that both the oxygen and nitrogen atoms of the pyrrolidone unit can promote the adsorption of PVP chains on the surface of silver [46]. When PVP was introduced, it is believed that the selective interaction between PVP and various crystallographic planes of hcp could greatly reduce the growth rate along the (100) direction or enhances the growth rate along (111) direction. PVP has a polyvinyl skeleton with polar group (N-C˭O) indicating the presence of a strong interaction between the surfaces of NiSe nanoparticles and PVP through coordination bonding with the O and N atoms of the pyrrolidone ring [47]. This group can efficiently bind with the active sites of Ni, resulting in the shortage of active sites for the reduction. It is well supported that isotropic growth in the case of NiSe_PP leads to cube shaped morphology [45,48]. On the other hand the absence of surfactant (NiSe-PN) allows the growth of nanoparticle on the seed happens along all the planes with equal probability.
3.2. Reduction of PNA and PNP
The reduction of nitro aromatic compounds to the corresponding amines is considered as the important process in controlling environmental pollution [49,50]. The conventional method of reducing these
เก็บกัก การปรากฏตัวของยอด [100], [101], [102], [110], [103] และ [202] สังเกตการก่อตัวของโครงสร้างการสั่งซื้อของ NiSe [39] ใน PXRD confirm การขาด หรือหักได้สูงสุด [100] รุนแรงที่ 2θ = 28.5 ° (รูป 2b และ e) แสดงให้เห็น deficiency น่าเป็นที่ตำแหน่งนิ (Ni1−xSe), ซึ่งได้รับการสนับสนุน โดยรายงาน Ni0.85Se [44] ตามขนาดของลูกบอลทังสเตนคาร์ไบด์ลดลง (NiSe_BM3 และ NiSe_BM1.6), ความเข้มข้นของ [100] เครื่องบินได้ลดลงตามสัดส่วน หรือกลายเป็นขาด ไม่มีต่ำกว่ามุมสูง (2θ = 28.5 องศา) แทนนิ deficiency (Ni1−xSe) (รูปที่ 2b) และเพิ่มใน FWHM ของยอดความเข้มสูงบ่งชี้ว่า การลดขนาดอนุภาค (รูป 2 c) ในทำนองเดียวกัน การขาดเครื่องบิน [100] ในรูปแบบ PXRD ตัวอย่าง NiSe_PN และ NiSe_PP (รูปแบบ 2 มิติและ e) ยังระบุ deficiency Ni (Ni1−xSe) ด้วยองค์ประกอบที่คาดไว้ของ Ni0.85Se [44] ขนาดผลึกของ NiSe_BM10, NiSe_BM5, NiSe_BM3, NiSe_BM1.6 และ NiSe_PN, NiSe_PP มีคำนวณ โดยใช้สูตร Scherrer และแสดงไว้ในตาราง S1 ส่งวัดชาวดัตช์ (TEM) และพื้นที่ที่เลือกรูปแบบ diffraction (SAED) อิเล็กตรอนของ confirmed NiSe_PN ตัวอย่างการก่อตัวของเก็บกักเหมือนกัน (รูปที่ 3a) บนมืออื่น ๆ ชุด PVP สนับสนุนการก่อตัวของแท่งนาโนของ NiSe_PP (รูปที่ 3b) SAED สอดคล้องแสดงให้เห็นธรรมชาติผลึกในสารทั้งสองดังที่แสดงในแทรกรูป 3a และ b อย่างไรก็ตาม ตามที่คาดไว้ อนุภาคมารวบรวมกรณีตัวอย่างที่สังเคราะห์ โดยลูกกัดวิธี (4 รูป) [33] ภาพ TEM อย่าง NiSe (รูป 4) แป้ง 15 นาทีตามขนาดลูกบอลทังสเตนคาร์ไบด์แตกต่างจาก 10 1.6 มม.แสดงอนุภาคเป็นสิ่งแปลกปลอม และ agglomerated อย่างยิ่ง มีขนาดผลึกเฉลี่ยคำนวณจากรูปแบบ PXRD โดยใช้สูตร Scherrer 9 นาโนเมตร(ตาราง S1) นอกจากนี้ รูป SAED (แทรกภาพในรูปที่ 4) NiSe_BM มีคในธรรมชาติ ผลลัพธ์ก่อนหน้าแนะนำว่า PVP ทำหน้าที่เป็นตัวแทนสูงสุดที่กำหนด และรักษาเก็บกักเกิดขึ้นจากการรวมตัวกัน แต่ยัง มีบทบาทในการก่อตัวของ specific สัณฐานเช่นก้อน แท่ง หรือสาย [45] อินฟราเรด (IR) และ Xray photoelectron ศึกษาสเปกโทรสโก (XPS) ใช้ในการอธิบายกลไกการเจริญเติบโต นั้นสังเกตว่า อะตอมออกซิเจนและไนโตรเจนของหน่วย pyrrolidone สามารถส่งเสริมการดูดซับของโซ่ PVP บนผิวเงิน [46] เมื่อรู้จัก PVP เชื่อว่า การโต้ตอบที่เลือกระหว่างการ PVP และเครื่องบิน crystallographic ต่าง ๆ ของบุคลากรทางการแพทย์สามารถช่วยลดอัตราการเติบโตไปตามทิศทาง (100) หรือช่วยเพิ่มอัตราการเติบโตไปตามทิศทาง (111) PVP มีโพลีไวนิลโครงกระดูกกับกลุ่มขั้ว (N C˭O) แสดงการปรากฏตัวของการโต้ตอบแรงระหว่างพื้นผิวเก็บกัก NiSe และ PVP ผ่านประสานยึดเกาะกับอะตอมของ O และ N ของวงแหวน pyrrolidone [47] กลุ่มนี้สามารถผูก efficiently ใช้งานไซต์ของ Ni เป็นผลในปัญหาการขาดแคลนสถานที่ใช้งานอยู่สำหรับการลด มันดีสนับสนุนเป็น isotropic เติบโตในกรณี NiSe_PP สู่ก้อนมีรูปร่างสัณฐานวิทยา [45,48] คง ขาดสารทำความสะอาด (NiSe-PN) ช่วยให้การเติบโตของ nanoparticle สูงเมล็ดพันธุ์ที่เกิดขึ้นไปพร้อมเครื่องบิน มีพอ ๆ กัน3.2. ลด ของ PNA และ PNPการลดลงของสารหอม nitro ไปเอมีนที่สอดคล้องกันถือว่าเป็นกระบวนการสำคัญในการควบคุมมลพิษสิ่งแวดล้อม [49,50] วิธีการทั่วไปของการลดเหล่านี้
การแปล กรุณารอสักครู่..
