Charging Operation
(1) Screw the head of ST2C off and screw the CH2C onto the top of the torch body, ensuring the battery is still present in the ST2C
(2) Connect the USB cord to the CH2C and to an appropriate power supply (laptop, wall charger, etc)
(3) Turn the tail switch of the ST2C ON
(4) The Charging Indicator Lights should illuminate to indicate power is present and show the status of the battery (Charging/Complete/Not inserted or inserted incorrectly)
Charging Time
The typical charging time for an 18650 2200mAh battery (from 0% charge) is approximately 5.4 hours from a standard USB connection.
Charging Indicator Lights
(1) While charging, the RED ‘Charging’ LED is illuminated.
(2) When complete the GREEN ‘COMPLETE’ LED is illuminated.
(3) If no battery is inserted or the torch tail switch is OFF the GREEN ‘COMPLETE’ LED is illuminated and the RED ‘CHARGING’ LED will flash.
(4) If the battery is inserted incorrectly the GREEN ‘COMPETE’ LED will pulsate.
Note: DO NOT continue to use the charger if no indicator LEDs are illuminated while the charger is inserted on the torch and power is present via USB. This may indicate a fault.