The external FRP reinforcement may be treated in analogy to the internal steel (accepting that the CFRP carries only normal stresses in the principal CFRP material direction), assuming that at the ultimate limit state in shear (concrete diagonal tension) the CFRP develops an effective strain in the principal material direction, Ɛf,e which is in general, less than the tensile failure strain, Ɛfu. The effective strain depends on the degree of CFRP debonding when the shear capacity of the RC is reached; that is, on the type of anchorage (properly anchored CFRP, e.g. closed jackets, versus poorly anchored FRP, i.e. open jackets). Hence, the shear capacity of a strengthened element may be calculated as follows (e.g. in Eurocode 2 format):
ที่ ภายนอก frp เพิ่มชั้นเสริมแรงป้องกันอาจจะได้รับการปฏิบัติในสถานการณ์ที่ ภายใน เหล็ก(การยอมรับว่า cfrp มีปกติ,เฉพาะความตึงเครียดในต้น cfrp วัสดุไปในทิศทางตรงกันข้ามกับแนว),การสันนิษฐานว่าที่ที่จำกัดของรัฐในตัด(คอนกรีตในแนวทแยงมุมความตึงเครียด) cfrp พัฒนาที่มี ประสิทธิภาพ ความเมื่อยล้าในที่สำคัญวัสดุเชื่อมต่อในทิศทาง, ɛf , E ซึ่งอยู่ในทั่วไป,น้อยกว่าที่ต้านทานความล้มเหลวความเมื่อยล้า,ɛfu . ดึงมี ประสิทธิภาพ จะขึ้นอยู่กับระดับของ debonding cfrp เมื่อความจุของ RC กรรไกรที่มาถึงที่อยู่ใน ประเภท ของที่ทอดสมอ(เสื้อแจ็คเก็ต cfrp เช่นปิดสนิททอดสมอเมื่อเทียบกับ frp ทอดสมออยู่ได้ไม่ดีนักนั่นคือเสื้อแจ็คเก็ตชูชีพเปิดให้บริการ) ดังนั้นจึงขาดความจุของส่วนประกอบมากขึ้นที่อาจได้รับการคำนวณดังนี้:(เช่นในรูปแบบ eurocode 2 )
การแปล กรุณารอสักครู่..
![](//thimg.ilovetranslation.com/pic/loading_3.gif?v=b9814dd30c1d7c59_8619)