A Benzene was collected for 8 h using thermal desorption
tubes (Tenax TA, Markes International Ltd.,
UK.). For quantification, benzene was desorbed from
the tubes using a thermal desorption unit (UNITY,
Markes International Ltd.) and analyzed by gas chromatography
equipped with mass spectrometry (GC–MS,
Agilent 6890, USA). Chromatographic separation was
achieved using a GC column (RTx-5, 30m×0.32mm
i.d. 0.25m film thickness, Restex, USA). GC conditions
were as follows: 99.99% as the carrier gas, pressure
of 15 psi, initial column temperature of 40 ◦C was held
for 3 min, an oven ramp rate of 10 ◦C/min to 200 ◦C and
ramp rate of 50 ◦C/min to 280 ◦C.MSconditions were as
follows: EI mode ion source, Acquisition modewas SIM
at m/z 78, MS quad temperature of 150 ◦C, MS source
temperature of 230 ◦C and a run time of 23 min.
เบนซีนที่ถูกเก็บรวบรวมเป็นเวลา 8
ชั่วโมงโดยใช้คายความร้อนหลอด(Tenax TA, Markes อินเตอร์เนชั่นแนล จำกัด ,
สหราชอาณาจักร.) สำหรับปริมาณเบนซินได้หลุดออกจากท่อโดยใช้หน่วยการคายความร้อน (UNITY, Markes อินเตอร์เนชั่นแนล จำกัด ) และวิเคราะห์โดยแก๊สโครมาพร้อมกับมวลสาร(GC-MS, Agilent 6890 สหรัฐอเมริกา) การแยกสารได้รับการประสบความสำเร็จโดยใช้คอลัมน์ GC (RTX-5, 30 × 0.32mm รหัส 0.25? เมตรความหนาของฟิล์ม, Restex สหรัฐอเมริกา) เงื่อนไข GC มีดังนี้ 99.99% ในขณะที่ผู้ให้บริการก๊าซความดัน15 ปอนด์ต่อตารางนิ้วอุณหภูมิคอลัมน์เริ่มต้นของ 40 ◦Cถูกจัดขึ้นเป็นเวลา3 นาที, อัตราลาดเตาอบ 10 ◦C / นาที 200 ◦Cและอัตราลาด50 ◦C / นาที 280 ◦C.MSconditionsมีดังต่อไปนี้: แหล่งกำเนิดไอออนโหมด EI, การได้มาซึ่ง modewas ซิมที่ม. / z 78, MS อุณหภูมิสี่เหลี่ยม 150 ◦Cแหล่ง MS อุณหภูมิ 230 ◦Cและเวลาทำงาน 23 นาที .
การแปล กรุณารอสักครู่..
