2.5. Distribution coefficient (Kd) measurement
The tested matrices included tap water (Beijing, China), ground
water (Qingdao, China), sea water from Bohai bay (Qingdao, China),
lake water (Wuhan, China) and river water from Yangtze River
(Wuhan, China). All samples were filtered with 0.45 m micron cellulose
membranes and spiked with Hg2+, Pb2+, Ag+ and Cu2+ to final
concentrations of 100 g/L. Aliquots of 10 mL samples were filled
into series of 15 mL of capped polypropylene bottles followed by
addition of 0.1 mg SH-mSi@Fe3O4 and agitated in a rotatory oscillator
at 200 rpm at room temperature (25 ◦C) for 5 h. The samples
were then placed on a magnet to separate the adsorbent from the
sample solution. The supernatant was pipetted for analysis. Kd was
calculated with the equation as below [27]:
2.5. Distribution coefficient (Kd) measurementThe tested matrices included tap water (Beijing, China), groundwater (Qingdao, China), sea water from Bohai bay (Qingdao, China),lake water (Wuhan, China) and river water from Yangtze River(Wuhan, China). All samples were filtered with 0.45 m micron cellulosemembranes and spiked with Hg2+, Pb2+, Ag+ and Cu2+ to finalconcentrations of 100 g/L. Aliquots of 10 mL samples were filledinto series of 15 mL of capped polypropylene bottles followed byaddition of 0.1 mg SH-mSi@Fe3O4 and agitated in a rotatory oscillatorat 200 rpm at room temperature (25 ◦C) for 5 h. The sampleswere then placed on a magnet to separate the adsorbent from thesample solution. The supernatant was pipetted for analysis. Kd wascalculated with the equation as below [27]:
การแปล กรุณารอสักครู่..

2.5 ค่าสัมประสิทธิ์การกระจาย ( KD ) การวัด
ทดสอบเมทริกซ์รวมน้ำประปา ( ปักกิ่ง , จีน ) , น้ำบาดาล
( ชิงเต่า , จีน ) , น้ำทะเลจากอ่าวนาง ( ชิงเต่า , จีน ) ,
น้ำในทะเลสาบ ( ประเทศจีน ) และน้ำจากแม่น้ำแยงซี
( ประเทศจีน ) ตัวอย่างทั้งหมดจะถูกกรองด้วย 0.45 ไมครอนเยื่อเซลลูโลส M
และถูกแทงด้วย hg2 แบบเคลื่อนที่ , เอจี , และสุดท้าย
CU2 ปริมาณ 100 กรัม / ลิตรเฉยๆ 10 ตัวอย่างมลเต็ม
เป็นชุด 15 ml ขวดฝาครอบ Polypropylene ตาม
เพิ่ม 0.1 มก. SH MSI @ fe3o4 และสั่นเครือใน
oscillator ซึ่งทำให้หมุนรอบที่ 200 รอบต่อนาทีที่อุณหภูมิห้อง ( 25 ◦องศาเซลเซียสเป็นเวลา 5 ชั่วโมง ตัวอย่าง
แล้ววางไว้บนตัวดูดซับจากแม่เหล็กแยก
ตัวอย่างสารละลาย และน่าน เป็น pipetted สำหรับการวิเคราะห์ ดาลตันคือ
การคำนวณด้วยสมการดังนี้ [ 27 ] :
การแปล กรุณารอสักครู่..
