This project aims to increase the p

This project aims to increase the production capacity of the drill press. By reducing the time in the production process of the perforation pump. In carrying out the project, a tool was used to analyze the problem and find the cause, namely the fishbone diagram. The main cause of lost time in the production process is the time spent setting up the hole pump and setting up the robot before starting to produce the workpiece. For a long time, there was a search for tools and dies that needed to be collected and used, and there was no system for disbursing tools and dies for wasting time in setting up a punch press. Another reason for wasting time is because the position of the holes in each piece is not the same, so the position must be adjusted every time, which is to set up the robot. After that, we have improved the production process of the hole pump to make it practical. Keep up with the needs of other processes. After the hole stamping workpiece is completed The creator has proposed two ways to improve and solve the problem: 1. Create a store and a system for checking tooling and die for disbursement and find out which stamping machine is being used in order to establish standards for disbursement. 2. Modifying to use a sponge gripper head instead of using a rubber stopper for the B1F8 factory and creating a time recording form for calculating production time and completion time of workpieces in order to record the distance. Workpiece production time When improving the process of the punch press, the production of the workpiece becomes more systematic. The operator of the punch press can prepare tooling and dies for production quickly because there is a dispenser that allows immediate assembly and production of the workpiece. Because there is space allocated for making a temporary store that is convenient for employees to pick up tooling and dies, and it is an area used for the work of employees in the store department and creating documents for use in work that can be traced back to the machine operator. A punching pump that can dispense tooling and die. In terms of the robot process, the punching pump operator can control the sucking of the workpiece more easily because of the Gripper that can change the sucking of the workpiece more quickly because it can suck on every surface. Without having to make any position adjustments again, the results obtained from improving the setup of the punch press and the setup of the robot result in increased production capacity, which can reduce the production time of the punch press. 610 minutes per day reduced to 580 minutes per day