8.
Oil spill constitutes a major source of fresh and seawater pollution as a result of accidental discharge from tankers, marine engines, and underwater pipes. Therefore, the need for cost-effective and environmental friendly sorbent materials for oil spill cleanup cannot be overemphasized. The present work focuses on the preliminary study of empty palm fruit bunch fibre as a promising sorbent material. The morphology of the unmodified empty palm fruit bunch, EPFB fibre, was examined using an optical microcopy, scanning electron microcopy coupled with EDX and X-ray diffraction. The effects of oil volume, fibre weight, and time on oil absorption of EPFB fibre were evaluated with new engine oil from the model oil. The results show that EPFB fibre consists of numerous micro pores, hydrophobic, and partially crystalline and amorphous with approximately 13.5% carbon. The oil absorbency of the fibre increased with the increase in oil volume, immersion time, and fibre weight. However, sorption capacity decreased beyond 3 g in 100 mL. Additionally unmodified EPFB fibre showed optimum oil sorption efficiency of approximately 2.8 g/g within three days of immersion time.
9.
An estimated 4.1 million barrels of oil and 2.1 million gallons of dispersants were released into the Gulf of Mexico during the Deepwater Horizon oil spill. There is a continued need for information about the impacts and long-term effects of the disaster on the Gulf of Mexico. The objectives of this study were to assess bioavailable polycyclic aromatic hydrocarbons (PAHs) in the coastal waters of four Gulf Coast states that were impacted by the spill. For over a year, beginning in May 2010, passive sampling devices were used to monitor the bioavailable concentration of PAHs. Prior to shoreline oiling, baseline data were obtained at all the study sites, allowing for direct before and after comparisons of PAH contamination. Significant increases in bioavailable PAHs were seen following the oil spill, however, preoiling levels were observed at all sites by March 2011. A return to elevated PAH concentrations, accompanied by a chemical fingerprint similar to that observed while the site was being impacted by the spill, was observed in Alabama in summer 2011. Chemical forensic modeling demonstrated that elevated PAH concentrations are associated with distinctive chemical profiles.