This study quantifies the adsorption of heavy metals on 4 typical moss species used for environmental monitoring in the moss bag technique. The adsorption of Cu2+, Cd2+, Ni2+, Pb2+ and Zn2+ onto Hypnum sp., Sphagnum sp., Pseudoscleropodium purum and Brachytecium rutabulum has been investigated using a batch reactor in a wide range of pH (1.3–11.0) and metal concentrations in solution (1.6 μM–3.8 mM). A Linear Programming Model (LPM) was applied for the experimental data to derive equilibrium constants and the number of surface binding sites. The surface acid–base titration performed for 4 mosses at a pH range of 3–10 in 0.1 M NaNO3 demonstrated that Sphagnum sp. is the most efficient adsorbent as it has the maximal number of proton-binding sites on the surface (0.65 mmol g−1). The pKa computed for all the moss species suggested the presence of 5 major functional groups: phosphodiester, carboxyl, phosphoryl, amine and polyphenols. The results of pH-edge experiments demonstrated that B. rutabulum exhibits the highest percentage of metal adsorption and has the highest number of available sites for most of the metals studied. However, according to the results of the constant pH “Langmuirian” isotherm, Sphagnum sp. can be considered as the strongest adsorbent, although the relative difference from other mosses is within 20%. The LPM was found to satisfactorily fit the experimental data in the full range of the studied solution parameters. The results of this study demonstrate a rather similar pattern of five metal adsorptions on mosses, both as a function of pH and as a metal concentration, which is further corroborated by similar values of adsorption constants. Therefore, despite the species and geographic differences between the mosses, a universal adsorption edge and constant pH adsorption isotherm can be recommended for 4 studied mosses. The quantitative comparison of metal adsorption with other common natural organic and inorganic materials demonstrates that mosses are among the most efficient natural adsorbents of heavy metals.
การศึกษาการดูดซับโลหะหนักใน quantifies 4 ปกติมอสชนิดที่ใช้สําหรับการตรวจสอบสิ่งแวดล้อมในมอสถุง ) การดูดซับ CU2 CD2 ni2 , , , และ zn2 แบบเคลื่อนที่บน hypnum sp . , พืชมอส sp . , pseudoscleropodium purum brachytecium rutabulum และได้ศึกษาโดยใช้เครื่องปฏิกรณ์แบบกะในช่วงกว้างของ pH ( 1.3 – 11.0 ) และปริมาณโลหะในสารละลาย ( 16 μ M – 3.8 มิลลิเมตร ) การเขียนโปรแกรมแบบเชิงเส้น ( ของเหลว ) ถูกใช้เพื่อการทดลองสร้างค่าคงที่สมดุลและหมายเลขของเว็บไซต์ผูกกับพื้นผิว การไทเทรตกรด - เบส ผิวออกเป็น 4 ) ที่ pH ในช่วง 3 - 10 ใน 0.1 M NaNO3 แสดงให้เห็นว่าพืชมอส sp . เป็นสารดูดซับที่มีประสิทธิภาพมากที่สุดเป็นจำนวนสูงสุดของโปรตอนเว็บไซต์ผูกบนพื้นผิว ( 065 มิลลิโมล G − 1 ) มีความแปรปรวนชนิดทั้งหมดมอสแนะนำการปรากฏตัวของ 5 หมู่ฟังก์ชันคาร์บอกซิล ฟ ฟอริลฟ โฟไดเ เตอร์ , สาขา , เอมีน , และโพลี . ผลการทดลองพบว่า pH ของขอบ . rutabulum แสดงเปอร์เซ็นต์การดูดซับโลหะและมีจำนวนสูงสุดของเว็บไซต์ที่พร้อมใช้งานสำหรับที่สุดของโลหะที่ศึกษา อย่างไรก็ตามผลของพีเอช " คงที่ langmuirian " โดยใช้พืชมอส sp . , ถือได้ว่าเป็นสารดูดซับที่แข็งแกร่งแม้ว่าความแตกต่างสัมพัทธ์จากมอสอื่นๆภายใน 20 % ส่วนของเหลว พบว่าพอใจพอดีกับข้อมูลการทดลองในช่วงที่เต็มรูปแบบของการวิจัยได้ทำการแก้ไขผลการศึกษานี้แสดงให้เห็นถึงลักษณะของโลหะมากกว่าห้าทดสอบบนมอส ทั้งสองเป็นฟังก์ชันของ pH และความเข้มข้นของโลหะ ซึ่งเป็นการเพิ่มเติม corroborated โดยค่าที่คล้ายกันของค่าคงที่สมดุลการดูดซับ ดังนั้น แม้จะมีชนิดและความแตกต่างทางภูมิศาสตร์ระหว่างมอส ,ขอบการดูดซับไอโซเทอมการดูดซับคงที่อสากลและสามารถแนะนำ 4 เรียนมอส . การเปรียบเทียบปริมาณการดูดซับโลหะกับอื่น ๆทั่วไป ธรรมชาติอินทรีย์ และอนินทรีย์วัสดุสาธิต ) อยู่ท่ามกลางธรรมชาติดูดซับที่มีประสิทธิภาพมากที่สุดของโลหะหนัก
.
การแปล กรุณารอสักครู่..
